show

'67 Casper Nova Part I

[SR2011-01]

Andy's '67 Chevy II had been sitting for 2 years, no motor, trans, after cancer took the life of his 30 year old wife. Raising 3 kids solo, left no time or money to rebuild the car the kids call 'Casper'. Our Loctite Team hopes to make a dream come true.

Andy's '67 Chevy II had been sitting for 2 years, no motor, trans, after cancer took the life of his 30 year old wife. Raising 3 kids solo, left no time or money to rebuild the car the kids call 'Casper'. Our Loctite Team hopes to make a dream come true.

Loctite

800-LOCTITE

  • Threadlocker 220, Threadlocker 222, Threadlocker 243, Blue Stick Threadlocker, Red Stick Threadlocker, Thread Sealant PST 565, RTV 587 Blue Silicone Gasket Maker, Antiseize Lubricant, Klean 'N Prime, Hi-Tack Stick, 5699 Grey High Performance RTV Silicone Gasket Maker & Head Bolt and Water Jacket Sealant |

    CLICK FOR MORE
  • Threadlocker 263 |

    CLICK FOR MORE
  • Threadlocker 2422 |

    CLICK FOR MORE
  • Thread Sealant 545 |

    CLICK FOR MORE
  • Maximum Strength Headliner Adhesive, Extend Rust Treatment (aerosol) & Extend Rust Treatment (bottle) |

    CLICK FOR MORE
  • Black Weatherstrip Adhesive, Rubberized Undercoating, White Lithium Grease, Silicone Lube, QuickTape 249 & 5510 Adhesive/Sealant |

    CLICK FOR MORE
  • Copper Anti-Seize Stick |

    CLICK FOR MORE

Summit Racing

800-230-3030

  • Blueprint performance short block w/383 stroker rotating assembly, Street & Strip oil pan & pickup |

    CLICK FOR MORE
  • Replacement chassis wiring harness |

    CLICK FOR MORE
  • H4 halogen conversion headlamps |

    CLICK FOR MORE

Edelbrock

800-FUN-TEAM

  • E-Tec Performer RPM aluminum cylinder heads, E-Tec Performer RPM aluminum intake & performance gasket set |

    CLICK FOR MORE
  • Thunder Series AVS 800cfm carburetor w/electric choke, dual feed inlet with filter, fuel regulator & 180 gallon per hour mechanical fuel pump |

    CLICK FOR MORE

E3

Mallory

  • Billet Unilite distributor, HyFire 6 ignition box, Pro Master wires & coil |

    CLICK FOR MORE

Comp Cams

800-999-0853

  • Custom ground roller camshaft, hydraulic roller lifters, custom pushrods, performance timing gear set, two-piece timing cover & aluminum roller rocker arms |

    CLICK FOR MORE

ARP

800-826-3045

  • Chromemoly head bolt kit, stainless steel 12-point intake bolt kit, 12-point accessory bolt kit, distributor & balancer kits |

    CLICK FOR MORE
  • Chromemoly torque converter bolt kit & flex plate bolt kit |

    CLICK FOR MORE

Melling

517-787-8172

Lokar

877-469-7440

Speed by Spectre

  • Aluminum valve covers, thermostat housing & heater hose nipple |

    CLICK FOR MORE

Visual Impact Performance Systems (VIPS)

  • Billet aluminum accessory drive pulley system (pulleys, pulley brackets, AC compressor, alternator, water pump, power steering pump & reservoir) |

    CLICK FOR MORE

Powermaster

865-688-5953

Optima Battery

Rusty's Offroad

Accel

216-688-8300

  • Lightning battery cables, terminal ends & shrink sleeving |

    CLICK FOR MORE

TCI

  • 700R4 performance automatic transmission, 2200-2400 rpm stall torque converter, transmission cooler, shifter & externally balanced flex plate |

    CLICK FOR MORE

Flowmaster

800-544-4761

  • 50 Series stainless steel chambered mufflers & 2½-inch U-Fit dual exhaust builder kit |

    CLICK FOR MORE

Hooker

Wilwood

  • Front: 14-inch rotors with 6 piston billet aluminum calipers Rear: 14-inch rotors with 4 piston billet aluminum calipers Billet aluminum master cylinder, parking brake cable kit, front caliper flex brake lines & proportioning valve |

    CLICK FOR MORE

Speedway Motors

855-313-9179

Classic Industries

800-854-1280

  • OER original equipment replacement interior rear window moldings, headliner kit, door panels & clips, kick panels, package tray, sail panels, glove box liner, sun visors & supports, molded carpet, carpet underlay, firewall insulation kit, front & rear seat covers, rear seat shelf insulation, lower seat panels, front & rear seat belts, dash pad, custom instrument panel analog gauges and wiring, armrest pad & base kit, rear view mirror & bracket, window cranks, door handles, hinge pins & bushings, door panel emblems, accelerator pedal, brake pedal pad, radio w/CD changer, front & rear speakers, smart antenna & steering wheel |

    CLICK FOR MORE
  • OER original equipment full replacement floor pan, quarter panels, front floor braces, tail panel, 2" cowl induction hood & under hood insulation, weather stripping, outer door mirror, door sill plates, outer door handles, tail lamp assemblies, bumper brackets, bezel seals, headlamp adjusters, lamp lenses, hood lip molding, rubber bumper kit and bumper mounts |

    CLICK FOR MORE
  • OER original equipment replacement fuel filler neck and gasket, fuel tank, gas cap, fuel tank straps and insulator, 4 barrel fuel sending unit & hardware |

    CLICK FOR MORE

Lizard Skin

ididit

  • Direct fit Nova steering column, U-joint & steering shaft |

    CLICK FOR MORE

Vintage Air

800-862-6658

  • Direct fit Nova air conditioning system with condenser, dryer, evaporator & hose kit |

    CLICK FOR MORE

Billet Specialties

(800)245-5382

  • Mag Series two-piece billet wheels Front: 18x8-inch Rear: 18x9-inch Valve stems & lug nuts |

    CLICK FOR MORE

BFGoodrich

  • g-Force TA KDW tires Front: 235/40ZR18 Rear: 255/40ZR18 |

    CLICK FOR MORE

Dupont

  • Chroma Premier paint system (Honda Grand Prix White, Saab Grey Stone Metallic & GM Pearl Blue) |

    CLICK FOR MORE

Auto Body Color & Supply

  • Primer/sealer, Raptor tintable spray-on liner, sand paper, body filler and painting & body prep supplies |

    CLICK FOR MORE

The Ring Brothers

Be Cool

  • Direct fit module aluminum radiator, aluminum overflow can & cap with 16-inch electric fan |

    CLICK FOR MORE

Heidt's

  • Pro-G front sub frame with power rack and pinion steering, polished stainless steel adjustable front control arms, spindles, adjustable front coil over shocks, chrome front springs, subframe connectors, motor mounts, cross member & front fender panel kit |

    CLICK FOR MORE
  • Adjustable 4 link rear suspension with pre-welded suspension mounting brackets, custom 9-inch rear end, 31 spline axles, adjustable rear coil over shocks with chrome springs & polished stainless steel adjustable pan hard bar |

    CLICK FOR MORE

Denny's Drive Shaft

800-955-1872

Dakota Digital

Industrial Depot

  • A complete line of custom fasteners from high tensile strength fasteners to custom stainless steel button heads plus assorted consumable shop supplies from cutoff wheels to flaps. |

    CLICK FOR MORE
Volunteer / Service Thumbnail

The Little Shop of Horrors

Lawrenceburg, TN

  • This shop specializes in building sport trucks, customs and hot rods with special emphasis on detailed metal shaping, fabrication and paint. Owner Eric Saliba's work has been featured in Street Trucks, Mini Truckin' and PowerBlock Magazine. A great example of his creativity: Casper's one-of-a-kind hand formed air cleaner.

  • CLICK HERE TO VISIT WEBSITE
Volunteer / Service Thumbnail

Hot Rod Transformations

Nashville, TN

  • Brian Finch transforms classic 60's and 70's muscle cars into Pro Touring machines that turn and stop as well as they run. This builder not only creates high tech g-machines for clients who want more than a faithful restoration, he also competes with his own '67 Mustang and ?71 Camaro winning numerous Pro Touring events.

  • CLICK HERE TO VISIT WEBSITE
Volunteer / Service Thumbnail

GodSpeed Rides

Brownsberg, IN

  • Builder Thom Ophof, a former mechanical engineer, decided that metal shaping hot rods, custom cars and bikes was way better than office work. Nine years later with TIG in hand Tom does it all - chassis fab, custom headers, chopped tops and lead work. This shop does it all from individual components to turn key vehicles.

  • CLICK HERE TO VISIT WEBSITE
Volunteer / Service Thumbnail

Brad Stark's Rod & Custom

Paducah, KY

  • Known for attention to detail, Brad Stark does complete car and bike builds specializing in metal work, chopped tops, louvers, paint & striping. His current projects: a '40 Willys gasser and '33 Chevy sedan street rod. Brad's 4 door to 2 door conversion of a '50 Chevy, "Tin Woody", is a Good Guys Custom of the Year winner.

  • CLICK HERE TO VISIT WEBSITE
Volunteer / Service Thumbnail

Bay One Customs

Springfield, TN

  • Owner T.C. Penick is no stranger to the RTM Tech Center. This talented builder specializes in frame-off restorations and customs. His creativity has been featured on PowerBlock including a radical '64 El Camino with a bed mounted blown big block, a custom '34 cab-over-body Chevy truck and a supercharged '29 Ford street rod.

  • CLICK HERE TO VISIT WEBSITE
Volunteer / Service Thumbnail

Red Kap Work Wear

Nashville, TN

  • Red Kap, America's leading producer of work clothing since 1923, is the Official Work Shirt of the PowerBlock. Special thanks to Red Kap for equipping the Search & Restore build team work shirts that stood up to the restoration.

  • CLICK HERE TO VISIT WEBSITE
Volunteer / Service Thumbnail

LifeSize Communicatons

Dallas, TX

  • LifeSize, the leader in video conferencing and PowerBlock have teamed up to provide two way communications in Search & Restore episodes allowing Andy Wilson and his family to check in with the build team for updates in real time 1080p high definition.

  • CLICK HERE TO VISIT WEBSITE
Volunteer / Service Thumbnail

Auto Body Color & Supply

Nashville, TN

  • AutoBody Color & Supply's Brian Smith and team have provided the PowerBlock quality paint mixing systems, paints and body and painting supplies for years. They are a PPG Platinum distributor & Training Center for certification with 7 locations.

  • CLICK HERE TO VISIT WEBSITE
Volunteer / Service Thumbnail

Advanced Plating

Nashville, TN

  • Advanced Plating has earned the title "world's best chrome plating service" by doing extreme quality re-plating work. Owner Steve Tracy answered the call providing his premium signature bling to the Nova's bumpers, grill, head lamps, tail lamps and trim.

  • CLICK HERE TO VISIT WEBSITE
Volunteer / Service Thumbnail

Blast from the Past

Lebanon, TN

  • Owner Vance Gregory provided media blasting services to completely remove paint, rust and undercoating to reveal the true condition of the uni-body. Without his services, we would never have been able to see what Andy's Nova needed.

  • CLICK HERE TO VISIT WEBSITE
Volunteer / Service Thumbnail

Nitro Plate

Nashville, TN

  • The team at Nitroplate Nashville offered their services to apply their proprietary Nitroplate Bright ceramic coating to our headers and exhaust system. It provides thermal protection up 1300 degrees, helps scavenging and looks great.

  • CLICK HERE TO VISIT WEBSITE
Volunteer / Service Thumbnail

M&M Hot Rod Interiors

Holly Pond, AL

  • This unique upholstery shop has years of experience creating award winning interiors for everything from world class customs to daily drivers. Husband and wife team Wayne & Pamela McGriff signed on to re-build and recover the Nova?s factory seats.

  • CLICK HERE TO VISIT WEBSITE
Volunteer / Service Thumbnail

MotorHead Design House

Louisville, KY

  • When she heard about the Casper build, auto emblem designer Andrea Carnahan-Koenig offered to create custom emblems for Andy's Nova. Since 1997, Andrea has specialized in designing and casting unique auto "jewelry" to adorn custom vehicles.

  • CLICK HERE TO VISIT WEBSITE
Volunteer / Service Thumbnail

Snaproll Media

Franklin, TN

  • To add overhead shots of Search & Restore's hauler traveling across country, the guys at snaproll media volunteered their special helicopter production services. Their unmanned video-copters helped tell the story and capture the action from above.

  • CLICK HERE TO VISIT WEBSITE
Volunteer / Service Thumbnail

Advanced Auto Glass

Nashville, TN

  • Finding and installing auto glass is a job best left to a specialist. Auto glass expert Mike Dante is the guy PowerBlock shows turn to when they need to replace glass in a classic vehicle. Mike's specialty is supplying and installing hard to find auto glass.

Volunteer / Service Thumbnail

Solar Solutions

Franklin, TN

  • When it comes to window tinting and spray-in bed liners, the PowerBlock and Search & Restore hosts turn to the guys at Solar Solutions to provide the highest quality workmanship using 3M color stable window tint and Xtreme bed lining materials.

'74 Challenger

Ty Cardona sold his Barracuda as a teen to start a family. 26 years later his kids are grown, and a replacement Mopar sits in his driveway undone. Ty's a firefighter who spends his free time helping others. So we decided to help finish his dream car.

Watch This Build
(Thumbnail image) for build '74 Challenger

'74 Challenger Part I

[SR2012-13]

Ty Cardona sold his Barracuda as a teen to start a family. 26 years later his kids are grown, and a replacement Mopar sits in his driveway undone. Ty's a firefighter who spends his free time helping others. So we decided to help finish his dream.

Watch This Episode (Thumbnail image) '74 Challenger Part I

'74 Challenger Part II

[SR2012-14]

More metal mods happen this week when our team of volunteers tackle our firefighter's '74 Challenger. Custom rear spoiler and front and rear valances are hand crafted in efforts to create a one-of-a-kind modern muscle car. Plus Mike & John build a hemi.

Watch This Episode (Thumbnail image) '74 Challenger Part II

'74 Challenger Part III

[SR2012-15]

With over 1500 hours into the build, Tim and the volunteers spray color, wet sand, buff and polish Ty's Challenger. All this is being done for a PowerBlock viewer who works as a firefighter, and spends all his free time helping others. Good deed done!

Watch This Episode (Thumbnail image) '74 Challenger Part III

'74 Challenger Part Finale

[SR2012-16]

5 days to go, Tim Strange & the team ready the Challenger by firing up the hemi, and taking it for a shakedown run. Then Ty Cardona, his wife, kids, and grandchildren enter the Tech Center for their big day - the unveiling of his unique "dream Mopar".

Watch This Episode (Thumbnail image) '74 Challenger Part Finale

'51 Hudson Hornet

The Fabulous Hudson Hornet is legend, in NASCAR racing, in animated film, and now on PowerBlock, when Tim Strange rescues a stalled project from a Michigan viewer. Volunteers gently transform history into a show-stopping lead sled right before your eyes!

Watch This Build
(Thumbnail image) for build '51 Hudson Hornet

'51 Hudson Hornet Pt. I

[SR2012-09]

The Fabulous Hudson Hornet is legend, in NASCAR racing, in animated film, and now on PowerBlock, when Tim Strange rescues a stalled project from a Michigan viewer. Volunteers gently transform history into a show-stopping lead sled!

Watch This Episode (Thumbnail image) '51 Hudson Hornet Pt. I

'51 Hudson Hornet Part II

[SR2012-10]

The transformation of Tom Moore's Hudson from an undone resto-mod to an award-winning lead sled continues when scores of volunteers arrive at the Tech Center for mock up week. Great body work tech highlights week 2 as the '51 Hornet gets ready for paint.

Watch This Episode (Thumbnail image) '51 Hudson Hornet Part II

'51 Hudson Hornet Part III

[SR2012-11]

Week 3 means paint/polish and a final fit of dozens of components that will go into Tom's '51 Hornet. We'll look at the history of this amazing car, from NASCAR domination to defining affordable luxury. Plus the owner gets a sneak peek via a live feed.

Watch This Episode (Thumbnail image) '51 Hudson Hornet Part III

'51 Hudson Hornet Part Finale

[SR2012-12]

The final week is frantic in efforts to get the Hudson test driven before the entire Moore Family heads down from Michigan to see Tim's take on the owner's project. Fears are put to rest when they see the final result - a chopped and bagged masterpiece!

Watch This Episode (Thumbnail image) '51 Hudson Hornet Part Finale

'48 Ford F2

Shane Skennonto is a 36 year old construction safety manager in Philadelphia, PA. His girlfriend Amy wrote The PowerBlock asking us to help finish Shane's 1948 Ford F2 pickup that had been sitting in his father's garage since he passed away three years ago. Tim Strange and our Search & Restore team traveled to York, Pennsylvania - to surprise him with makeover of this classic truck, fulfilling a dream both his late father and grandfather had for the family. Shane calls this a "4-gen Ford" as Shane and Amy's 2 year old son will now be able to enjoy this family heirloom for many years to come, a piece of history that dates back to his great-grandfather.

Watch This Build
(Thumbnail image) for build '48 Ford F2

4-Gen '48 Ford Truck Part I

[SR2012-05]

Shane inherited a classic truck that has been in his family for decades. Honoring his father and grandfather who have since passed, he asked Tim Strange and our volunteer team for a little help.

Watch This Episode (Thumbnail image) 4-Gen '48 Ford Truck Part I

4-Gen '48 Ford Truck Part II

[SR2012-06]

With over 600 man hours into the truck during the teardown and metal work stage, work continues as more rust and patch panels are found under the fresh paint. Tim and volunteers provide how-to metal fab tips, as this classic truck gets ready for paint.

Watch This Episode (Thumbnail image) 4-Gen '48 Ford Truck Part II

4-Gen '48 Ford Truck Part III

[SR2012-07]

Owner Shane gets a peak at the progress as week 3 brings some of the top paint, body and airbrush/graphics talent from US & Canada. Watch Tim Strange and our volunteers pick up the pace when 1K more man hours are added to this cool yet traditional build.

Watch This Episode (Thumbnail image) 4-Gen '48 Ford Truck Part III

4-Gen '48 Ford Truck Part Finale

[SR2012-08]

Five days left to finish the F2 before the Skennonto family arrives from Pennsylvania to see our take on Shane's dad's classic truck. Guitar legend Billy Gibbons of ZZ Top stops by to lend his support when the truck is test driven before the big reveal.

Watch This Episode (Thumbnail image) 4-Gen '48 Ford Truck Part Finale

'55 Chevy 210 Handyman

In spite of being in a wheelchair, gearhead Chad Terhar never let his disability get in the way of his dream of rebuilding his dream car - a classic 1955 Chevy 210 Handyman. His wife calls him "handi-capable!" But when we learned Chad needed help finishing his project, Tim and the team traveled to Tacoma, Washington to surprise him with a well deserved makeover.

Watch This Build
(Thumbnail image) for build '55 Chevy 210 Handyman

'55 Chevy Handyman Wagon Pt. I

[SR2012-01]

Chad's a gearhead through and through. And a tragic motorcycle accident in his youth never stood in the way of fulfilling his dream of owning a '55 Chevy. Tim and the team surprises this Tacoma, WA family with a full blown makeover of his Handyman Wagon.

Watch This Episode (Thumbnail image) '55 Chevy Handyman Wagon Pt. I

'55 Chevy Handyman Wagon Part II

[SR2012-02]

Body work continues on the '55 Chevy Handyman when just about every piece of original sheet metal is replaced, even the chassis! Tim Strange and Tommy Boshers bring in some characters to help, while our owner checks in live via video feed for a looksee.

Watch This Episode (Thumbnail image) '55 Chevy Handyman Wagon Part II

'55 Chevy Handyman Wagon Part III

[SR2012-03]

More volunteers and mucho gallons of primer paint and clear are part of week 3 as the car progresses to better than new condition. Build leader Tim Strange provides step-by-step how to on the car painting process, plus how to get that million dollar shine!

Watch This Episode (Thumbnail image) '55 Chevy Handyman Wagon Part III

'55 Chevy Handyman Wagon Finale

[SR2012-04]

Final assembly in our last half hour of Chad's '55 Handyman Wagon, including some last minute engine troubleshooting, a "slot car-like" road test with Tim and Tommy, then the family arrives at the Tech Center for what is a very emotional give back.

Watch This Episode (Thumbnail image) '55 Chevy Handyman Wagon Finale

'67 Mustang Coupe

Tim and Tommy travel to Colorado Springs, CO where they meet Paul Kahler war veteran, Purple Heart recipient, and current Sergeant in the Colorado National Guard. His brother bought him his dream car when he got out of the Army back in 2006. But the turquoise '67 Mustang Coupe has seen better days. It's trailered back to the PowerBlock Tech Center for a Tim Strange transformation into a modern "G-machine" street rod.

Watch This Build
(Thumbnail image) for build '67 Mustang Coupe

Military Mustang Part I

[SR2011-13]

Build 4 begins in Colorado, when Tim surprises veteran Paul Kahler with a makeover. He earned a Purple Heart in Iraq, is a Sgt. with Colorado National Guard, and studies at night for degree in counseling. We take Paul's '67 coupe for a hot rod build up.

Watch This Episode (Thumbnail image) Military Mustang Part I

Military Mustang Part III

[SR2011-15]

Lots of volunteers this week including 2 Wyotech grads, suspension and air conditioning experts, and Tim and our build team who turn our Mustang build into a roller with new front suspension, 9" rear, and all the goodies to turn Paul's into a show winner!

Watch This Episode (Thumbnail image) Military Mustang Part III

Military Mustang Part II

[SR2011-14]

With all of the metal work done, the coupe heads for some serious body prep followed by Tim Strange's custom paint. While at the same time, the HorsePower guys take the Ford Racing short block, build power with performance headers, intake and carburetor.

Watch This Episode (Thumbnail image) Military Mustang Part II

Military Mustang Finale

[SR2011-16]

Tim Strange & our Wyotech Build Team wrap up week 4 with the completion of Paul Kahler's '67 Mustang Coupe. This veteran and his family pick up their ride, and many of the volunteers are on hand to show their appreciation for his service to our country.

Watch This Episode (Thumbnail image) Military Mustang Finale

Jeep TJ

Jason Smelser is a dedicated husband and family man with an under-powered Jeep TJ, so when Search & Restore found out what Jason does to give back to his community, we didn't want to pass up the opportunity to apply some much-needed TLC to his off-road renegade.

Watch This Build
(Thumbnail image) for build Jeep TJ

Jeep TJ on Steroids Part I

[SR2011-09]

Down in Louisiana is a dedicated father, and wheeler whose near stock TJ is too puny to hang with his buddies. With the help from the Xtreme 4x4 and Horsepower TV, and big group of volunteers, Jason's baby Jeep grows into a hardcore wheeler on steroids!

Watch This Episode (Thumbnail image) Jeep TJ on Steroids Part I

Jeep TJ on Steroids Part II

[SR2011-10]

The stripped TJ is treated to custom width 9" housings, heavy duty knuckles, and a one-off roll cage that will be the envy of Jason's 4-wheeling buddies. Plus hot rodder Tim Strange earns crawling credentials when he & Xtreme's Ian Johnson hit the trail.

Watch This Episode (Thumbnail image) Jeep TJ on Steroids Part II

Jeep TJ on Steroids Part III

[SR2011-11]

The kids at MedCamps of Louisiana will get a kick out of rides in this TJ, one that takes a page out of "Mad Max!" 40" tires, and heavy duty everything transform a stocker into a rocker!

Watch This Episode (Thumbnail image) Jeep TJ on Steroids Part III

Jeep TJ Reveal & Trail Ride

[SR2011-12]

Will Jason be surprised at our hardcore Jeep transformation? Find out in the conclusion of our fourth build, this time for a good guy who donates his summers to help disabled kids.

Watch This Episode (Thumbnail image) Jeep TJ Reveal & Trail Ride

'94 GMC 1500

The second build for Search & Restore takes us to Pomeroy, Ohio, where Anthony and Cindy Rowe live with their eight children. Anthony has a 1994 GMC 1500, his daily driver he's had to fix every few weeks, that is, until Search & Restore comes to retrieve it.

Watch This Build
(Thumbnail image) for build '94 GMC 1500

'94 GMC Part I

[SR2011-05]

In the second build of Search & Restore, we travel to Pomeroy, OH, to meet Anthony, who commutes to his job at the penitentiary in a worn-out '94 GMC Sierra. Rusted through, it's his daily driver. But fixing up the 4x4 is a distant second to raising his two biological, and five adopted, children. Search & Restore to the rescue!

Watch This Episode (Thumbnail image) '94 GMC Part I

'94 GMC Part II

[SR2011-06]

In the second part of the Sierra build on Search & Restore, the Royal Purple Build Team gets seriously busy building one rusted-through 4x4. The salty Southern Ohio roads haven?t been good to Anthony?s GMC, so it?s getting a new crate motor, junkyard frame, lift kit, suspension, and more!

Watch This Episode (Thumbnail image) '94 GMC Part II

'94 GMC Part III

[SR2011-07]

She works to feed needy kids. He works the 12 hr night shift. Together the Rowe's have fostered some 30 children, adopting 5 of them. We found this couple in Pomeroy, OH asking for help fixing his daily driver. Watch this '94 GMC 1500 turn to gold!

Watch This Episode (Thumbnail image) '94 GMC Part III

'94 GMC Finale

[SR2011-08]

Cindy, Anthony, and their 7 kids, five of them adopted, travel to the Search & Restore garage to get their rusted out 4x4, now sporting new everything! Engine, suspension, brakes, interior, restored bed and frame, plus one of Strange's custom paint jobs.

Watch This Episode (Thumbnail image) '94 GMC Finale

'67 Chevy Nova II

Andy's '67 Chevy II had been sitting for 2 years, no motor, trans, after cancer took the life of his 30 year old wife. Raising 3 kids solo, left no time or money to rebuild the car the kids call 'Casper'. Our Loctite Team hopes to make a dream come true.

Watch This Build
(Thumbnail image) for build '67 Chevy Nova II

'67 Casper Nova Part I

[SR2011-01]

Andy's '67 Chevy II had been sitting for 2 years, no motor, trans, after cancer took the life of his 30 year old wife. Raising 3 kids solo, left no time or money to rebuild the car the kids call 'Casper'. Our Loctite Team hopes to make a dream come true.

Watch This Episode (Thumbnail image) '67 Casper Nova Part I

'67 Casper Nova Part II

[SR2011-02]

The Chevy II returns from media blasting with some very bad news, and at least another 300 man hours of body repair added to this restoration. See metal work, body panels and the build up of a new 383 stroker as our Loctite Build Team goes full throttle.

Watch This Episode (Thumbnail image) '67 Casper Nova Part II

'67 Casper Nova Part III

[SR2011-03]

Part 3 in our Nova build includes delays in parts that have the Loctite Build Team nervous as body finishing is completed. The owner sees his 383 stroker fired up via web cam, and the Nova comes out of the paint booth with new paint with an old theme.

Watch This Episode (Thumbnail image) '67 Casper Nova Part III

'67 Casper Nova Finale

[SR2011-04]

Final episode of our '67 Nova as the family gets back their dream car and then some in an unbelievable reveal!

Watch This Episode (Thumbnail image) '67 Casper Nova Finale
Join the myPowerBlock family today!

POWERBLOCKTV

COMPANY

SOCIAL&APPS