Images for all of the HorsePower shop parts.
-
Backyard Buddy
Backyard Buddy has earned the trust of many satisfied rodders, restorers, collectors and racers for many years. Compare us to the competition. After you do, we're sure you too will own a Backyard Buddy lift, the safest lift money can buy. And after all, what else is important? Backyard Buddy Lifts use 4" square, U.S. made, structural steel tubing. Steel sleeves surround the post and heavy-duty dogs lock into notches cut in the steel.
Phone: 800-837-9353
www.backyardbuddy.com
-
Blast-it-All Shop Cabinet
Sturdy shop blasting cabinet available in 700 or 900 cfm versions to handle all your abrasive media needs.
Phone: 800-535-2612
www.blast-it-all.com
-
Dake Belt Sander
The powerful metal fabricating belt grinder has a 4 h.p. motor with belt speed of 6,600 fpm for rapid metal removal. Advanced belt tracking with a fixed position front wheel eliminates belt walk-off. The hinged top cover opens for grinding large pieces on the entire length of the belt. The grinder pivots on its own steel base for easy adjustment to accommodate various work piece sizes and shapes.
Phone: 800-937-3253
www.dakecorp.com
-
Dake Drill Press
The Dake SB-16 floor model drill press is a modern design that keeps the operator in mind. This single phase, 120 volt machine has a spindle speed range between 230 - 3400 rpm. Depth adjustment is as easy as setting a dial-in scale with a locking handle hub. The drill press also has a push button on/off switch, an emergency stop button, low voltage controls, thermal overload protection, and an interlock safety switch for the belt cover.
Phone: 800-937-3253
www.dakecorp.com
-
Dake Band Saw
The E-16 is a heavy gauge fabrication with infinitely variable blade speed from 50 to 500 fpm. Speeds are regulated hydraulically from the front of the machine and displayed on large LED readout. The saw has a low voltage push button station, door safety interlocks, and electrical enclosure is sealed to help keep chips out. The cast wheels have replaceable bandages. Standard equipment includes interchangable guide inserts and hardened back up bearings for rigid blade guidance.
Phone: 800-937-3253
www.dakecorp.com
-
Dake 25 Ton Hydraulic Press
This combination of presses is an economical solution for a complete press center. The reliable 25-ton hand-operated hydraulic press has handwheel for rapid ram advance before pressing. The 3-ton side mounted arbor press is perfect for inserting pins and bearings that require operator sensitivity.
Phone: 800-937-3253
www.dakecorp.com
-
Official Hardware-The Industrial Depot
Full line distributor of fasteners, including standard bolts & nuts, or hard to find, made to print items. Over 35 years of fastener experience.
Phone: 888-729-9925
www.theindustrialdepot.com
-
KnKut Drill Counter Display
KnKut Performance Drills are manufactured from high grade M-7 Molybdenum high speed steel. A 135 degree split point design gives you 50% more holes per drill.
Phone: 866-965-6588
www.knkut.com
-
Matco Tools
The shop is stock with a full set of Matco hand tools, shop equipment, and diagnostic equipment.
Phone: 888-696-2826
www.matcotools.com
-
Patton's Compressed Air Piping
All the PowerBlock shows use Patton's Infinity compressed air pipe to route air wherever it's needed. It is 100% metal, non-corrosive, has high-flow rates and low pressure losses because it is smooth-bore tubing, and has a 10-year leak free guarantee on materials. Easy assembly and disconnect with solid nickel plated couplings.
Phone: 704-523-4122
www.pattonsinc.com
-
Patton QGB 7.5 Air Compressor
The Quincy QGB 7.5 hp supplies everything required for high quality compressed air. This belt-driven rotary screw compressor, with optional integrated dryer and receiver tank, is supplied with a user-friendly microprocessor controller. QGB 7.5: Silence, simplicity and savings for you and your operation!
Phone: 704-523-4122
www.pattonsinc.com
-
Powder-X Powder Coating
The shop uses powder coating materials and equipment from Powder-X, as do all the shops on the PowerBlock --they are the Official Powder Coating Equipment of the PowerBlock. Powder coating produces a high quality and extremely durable finish, and Powder-X can outfit a small shop or a full industrial operation with their complete powder coating systems.
Phone: 886-326-4840
www.powder-x.com
-
Safety-Kleen Parts Washer
The Safety-Kleen sink-on-a-drum parts washer is indispensable in the shop. It has a fusible link cover, flexible metal spigot, and lamp. When we wash parts in the sink basin, the cleaning fluid drains into the drum below and is recirculated.
Phone: 800-669-5740
www.safety-kleen.com
-
Volunteer Welding Supply
The shop is kept fully stocked with welding supplies and gasses by Volunteer Welding Supply. In fact, all our PowerBlock shops rely on Volunteer for all their welding supplies and gas requirements
Phone: 615-256-5658
www.volunteerwelding.com
