Images for all of the MuscleCar shop parts.
-
Matco Tools
The shop is stock with a full set of Matco hand tools, shop equipment, and diagnostic equipment.
Phone: 888-696-2826
www.matcotools.com
-
Col-Met Paint Booth
Every painting project gets the benefit of the Col-Met full-sized downdraft paint booth. Constructed of 18-gauge steel, its highly efficient fans pull clean air down and filters it out the sides. Extra-clean and safe paint jobs result.
Phone: 888-452-6684
www.colmetsb.com
-
Matco Lift
Three and a quarter ton capacity, two post hydraulic lift.
Phone: 800-937-3253
www.matcotools.com
-
Patton's Compressed Air Piping
All the PowerBlock shows use Patton's Infinity compressed air pipe to route air wherever it's needed. It is 100% metal, non-corrosive, has high-flow rates and low pressure losses because it is smooth-bore tubing, and has a 10-year leak free guarantee on materials. Easy assembly and disconnect with solid nickel plated couplings.
Phone: 800-937-3253
www.pattonsinc.com
-
Blast-it-All Shop Cabinet
Sturdy shop blasting cabinet available in 700 or 900 cfm versions to handle all your abrasive media needs.
Phone: 800-937-3253
www.blast-it-all.com
-
Light Racing Dies
These flared hole dies are designed to eliminate edge tearing even when used on high strength 4130 chromoly sheet (normalized condition), with laser cut holes (hardened edges). Manufactured from premium hardened high carbon steel for maximum life, and usable up to a max sheet thickness of 0.090-in. for chromoly and 0.125-in for mild steel.
Phone: 800-937-3253
www.lightracing.com
-
Powder-X Powder Coating
The shop uses powder coating materials and equipment from Powder-X, as do all the shops on the PowerBlock --they are the Official Powder Coating Equipment of the PowerBlock. Powder coating produces a high quality and extremely durable finish, and Powder-X can outfit a small shop or a full industrial operation with their complete powder coating systems.
Phone: 888-729-9925
www.powder-x.com
-
RaceDeck Modular Garage Flooring
RaceDeck is the premier manufacturer of interlocking modular garage flooring. No tedious or chemical garage floor prepping and painting -- just snap in place your 12-in or 18-in garage tiles to cover your work space. Easy to clean by hosing off, and the tiles aren't affected by chemical or petroleum products or UV.
Phone: 866-965-6588
www.racedeck.com
-
Safety-Kleen Parts Washer
The Safety-Kleen sink-on-a-drum parts washer is indispensable in the shop. It has a fusible link cover, flexible metal spigot, and lamp. When we wash parts in the sink basin, the cleaning fluid drains into the drum below and is recirculated.
Phone: 888-696-2826
www.safety-kleen.com
-
TENNSMITH's Hand Brakes
TENNSMITH's new HBT72-16 is designed to provide forming capabilities for complex parts. This machine is truly a universal hand brake which allows for the removal of both upper and lower segments of fingers.
Phone: 704-523-4122
www.tennsmith.com
-
Official Hardware-The Industrial Depot
Full line distributor of fasteners, including standard bolts & nuts, or hard to find, made to print items. Over 35 years of fastener experience.
Phone: 704-523-4122
www.theindustrialdepot.com
-
Volunteer Welding Supply
The shop is kept fully stocked with welding supplies and gasses by Volunteer Welding Supply. In fact, all our PowerBlock shops rely on Volunteer for all their welding supplies and gas requirements.
Phone: 886-326-4840
www.volunteerwelding.com
-
Dake Drill Press
This 2 HP, three-phase Dake hydraulic press has a double-acting cylinder, a ram with lifting eyes for the table, and rapid ram advance. With its welded heavy steel plate frame, it handles everything we throw at it.
Phone: 800-669-5740
www.dakecorp.com
-
Dake Band Saw
The E-16 is a heavy gauge fabrication with infinitely variable blade speed from 50 to 500 fpm. Speeds are regulated hydraulically from the front of the machine and displayed on large LED readout. The saw has a low voltage push button station, door safety interlocks, and electrical enclosure is sealed to help keeps chips out. The cast wheels have replaceable bandages. Standard equipment includes interchangeable guide inserts and hardened back up bearings for rigid blade guidance.
Phone:800-937-3253
www.dakecorp.com
-
Dake 350 Cold Saw
The manual Dake 315 circular cold saw has a 12” diameter blade and cuts up 3-5/8” diameter tubing and 4-1/4” x 2-3/4” rectangles. The cold saw head rotates 45° left and right for miter cutting. It has a cam-activated vise for quick clamping and release. The large spindle and gear produce smooth accurate cuts.
Phone: 800-937-3253
www.dakecorp.com
-
TENNSMITH's Slip Rolls
TENNSMITH manufactures slip rolls ranging from the affordable manual to the convenient, powered model. Our slip rolls range from the 24" cutting length to 48". All our slip rolls are built to the solid performance that is standard with all TENNSMITH tools.
Phone: 931-934-2211
www.tennsmith.com
-
TENNSMITH's Notcher
The Tennsmith notcher, Model 16-18, is a versatile, heavy-duty bench tool for shearing, notching and piercing work. The heavy cast iron construction allows the notcher to be used to side shear 6 inches of material to its rated capacity.
Phone: 931-934-2211
www.tennsmith
-
TENNSMITH's Shears
Ground-alloy tool steel blades. Both the upper and lower blades have a 2 degree edge relief and the lower blade has an additional 1 degree face relief for maximum material penetration with minimum effort. Triaction blades help prevent material movement while shearing, prolonging blade life.
Phone: 931-934-2211
www.tennsmith.com
-
Attix 19 AS/PE2 Dustless Vacuum System
Cleaning System plus two airline outlets for pneumatic tools and one electrical outlet.
Phone: 877-366-2586
www.attix.com
-
Dake Belt Sander
The powerful metal fabricating belt grinder has a 4 h.p. motor with belt speed of 6,600 fpm for rapid metal removal. Advanced belt tracking with a fixed position front wheel eliminates belt walk-off. The hinged top cover opens for grinding large pieces on the entire length of the belt. The grinder pivots on its own steel base for easy adjustment to accommodate various work piece sizes and shapes.
Phone: 800-937-3253
www.dakecorp.com
-
Patton's Air Compressor & Dryer
The shop has a full-sized industrial-strength, heavy-duty unit from Patton (left) that never falters no matter how much we tax it. They remove moisture -- allowing clean, cool air to flow. The result is an efficient compressed air system that reduces energy costs and eliminates clogged pipes and valves. The MuscleCar shop has this unit plumbed in to insure efficiency and longevity.
Phone: 704-523-4122
www.pattonsinc.com
-
Miller Dynasty 200
The shop is kept fully stocked with welding supplies and gasses by Volunteer Welding Supply. In fact, all our PowerBlock shops rely on Volunteer for all their welding supplies and gas requirements
www.millerwelds.com
-
Miller Millermatic 140 with Auto-Set
New Millermatic eliminates welding guesswork with the new Miller Millermatic 140 with Auto-Set, Miller Electric Mfg. Co. has created the simplest wire welder in the industry. With this new 115 Volt all-in-one MIG welder, the user simply has to set the wire diameter and material thickness.
www.millerwelds.com
-
Millermatic 210
The shop is kept fully stocked with welding supplies and gasses by Volunteer Welding Supply. In fact, all our PowerBlock shops rely on Volunteer for all their welding supplies and gas requirements
www.millerwelding.com
-
Miller Spectrum 625 Plasma Cutter
For mild steel cutting (1/2--7/8-inch), the MuscleCar crew rely on one of Miller Welding's portable and steady plasma cutters. It's fast, induces less warpage, and makes smooth cuts.
www.millerwelding.com
-
Frame Flipper
The Frame Flipper is designed specifically to handle frames. It doesn't tie up your big rotisserie reworking the frame. The attach arms are designed to be sure the frame can be centered so it turns easily.
Phone: 877-283-9755
www.accessiblesolutions.com
-
KnKut Drill Counter Display
KnKut Performance Drills are manufactured from high grade M-7 Molybdenum high speed steel. A 135 degree split point design gives you 50% more holes per drill.
Phone: 877-283-9755
www.knkut
