Images for all of the Trucks! shop parts.
-
Matco Tools
The shop is stock with a full set of Matco hand tools, shop equipment, and diagnostic equipment.
Phone: 888-696-2826
www.matcotools.com
-
Kundel Crane
Machinery in the way, with Kundel's cranes free standing post that is not a problem. Kundel's open ended crane design means no cross braces to block access into the work area.
Phone: 888-696-2826
www.kundel.com
-
Torchmate CNC Cutting System
Torchmate CNC cutting machines are the result of clever design. Integrated with your existing personal computer, and internet it is perfect for small shop owners, metal art enthusiasts, ornamental iron works, wrought iron furniture makers, garden art dealers, street rod chassis builders, and others on limited budgets.
Phone: 866-571-1066
www.torchmate.com
-
Patton's Nitrogen Generator
Patton's nitrogen storage tank for distribution in the shop to supply inert nitrogen gas for airing-up of tires and other applications.
Phone: 704-523-4122
www.pattonsinc.com
-
Patton's Air Compressor & Dryer
The shop has a full-sized industrial-strength, heavy-duty unit from Patton (left) that never falters no matter how much we tax it. They remove moisture -- allowing clean, cool air to flow. The result is an efficient compressed air system that reduces energy costs and eliminates clogged pipes and valves. The MuscleCar shop has this unit plumbed in to insure efficiency and longevity.
Phone: 704-523-4122
www.pattonsinc.com
-
Patton's Nitrogen Generator
Patton's Inc. nitrogen generator (right) and nitrogen storage tank (left) for distribution in the shop to supply inert nitrogen gas for stabilized airing-up of off-road tires and other applications.
Phone: 704-523-4122
www.pattonsinc.com
-
Patton's Compressed Air Piping
All the PowerBlock shows use Patton's Infinity compressed air pipe to route air wherever it's needed. It is 100% metal, non-corrosive, has high-flow rates and low pressure losses because it is smooth-bore tubing, and has a 10-year leak free guarantee on materials. Easy assembly and disconnect with solid nickel plated couplings.
Phone: 704-523-4122
www.pattonsic.com
-
Col-Met Paint Booth
Every painting project gets the benefit of the Col-Met full-sized downdraft paint booth. Constructed of 18-gauge steel, its highly efficient fans pull clean air down and filters it out the sides. Extra-clean and safe paint jobs result.
Phone: 888-452-6684
www.colmetsb.com
-
Blast-It-All Shop Cabinet
Sturdy shop blasting cabinet available in 700 or 900 cfm versions to handle all your abrasive media needs.
Phone: 800-535-2612
www.blast-it-all.com
-
Light Racing Dies
These flared hole dies are designed to eliminate edge tearing even when used on high strength 4130 chromoly sheet (normalized condition), with laser cut holes (hardened edges). Manufactured from premium hardened high carbon steel for maximum life, and useable up to a max sheet thickness of 0.090-in. for chromoly and 0.125-in for mild steel.
Phone: 800-525-6505
www.lightracing.com
-
Powder-X Powder Coating
The shop uses powder coating materials and equipment from Powder-X, as do all the shops on the PowerBlock --they are the Official Powder Coating Equipment of the PowerBlock. Powder coating produces a high quality and extremely durable finish, and Powder-X can outfit a small shop or a full industrial operation with their complete powder coating systems.
Phone: 866-326-4840
www.powder-x.com
-
RaceDeck Modular Garage Flooring
RaceDeck is the premier manufacturer of interlocking modular garage flooring. No tedious or chemical garage floor prepping and painting -- just snap in place your 12-in or 18-in garage tiles to cover your work space. Easy to clean by hosing off, and the tiles aren't affected by chemical or petroleum products or UV.
Phone: 800-457-0174
www.racedeck.com
-
Safety-Kleen Parts Washer
The Safety-Kleen sink-on-a-drum parts washer is indispensable in the shop. It has a fusible link cover, flexible metal spigot, and lamp. When we wash parts in the sink basin, the cleaning fluid drains into the drum below and is recirculated.
Phone: 800-669-5740
www.safety-kleen.com
-
Official Hardware-The Industrial Depot
Full line distributor of fasteners, including standard bolts & nuts, or hard to find, made to print items. Over 35 years of fastener experience.
Phone: 866-729-9925
www.theindustrialdepot.com
-
Volunteer Welding Supply
The shop is kept fully stocked with welding supplies and gasses by Volunteer Welding Supply. In fact, all our PowerBlock shops rely on Volunteer for all their welding supplies and gas requirements
Phone: 615-256-5658
www.volunteerwelding.com
-
Dake Drill Press
This 2 HP, three-phase Dake hydraulic press has a double-acting cylinder, a ram with lifting eyes for the table, and rapid ram advance. With its welded heavy steel plate frame, it handles everthing we throw at it.
Phone: 800-937-3253
www.dakecorp.com
-
Dake Band Saw
The E-16 is a heavy gauge fabrication with infinitely variable blade speed from 50 to 500 fpm. Speeds are regulated hydraulically from the front of the machine and displayed on large LED readout. The saw has a low voltage push button station, door safety interlocks, and electrical enclosure is sealed to help keep chips out. The cast wheels have replaceable bandages. Standard equipment includes interchangable guide inserts and hardened back up bearings for rigid blade guidance.
Phone: 800-937-3253
www.dakecorp.com
-
Dake Cold Saw
The 3-speed, manual Dake 350 circular cold saw has a 14” diameter blade and cuts up 4-3/4” diameter tubing and 6-1/4” x 3-1/2” rectangles. The cold saw head rotates to 90° for slotting. It has a cam-activated vise for quick clamping and release. The large spindle and gear has an adjustable clutch to prevent over feeding the blade.
Phone: 800-937-3253
www.dakecorp.com
-
KnKut Drill Counter Display
KnKut Performance Drills are manufactured from high grade M-7 Molybdenum high speed steel. A 135 degree split point design gives you 50% more holes per drill.
Phone: 866-965-6588
www.knkut.com
-
Lincoln Electric TIG Power Source
The Invertec V205-T AC/DC is a compact, TIG power source and welder that weighs only 38-lb so it moves easily about the shop no matter the project.
Phone: 800-992-3525
www.lincolnelectric.com
-
Lincoln Electric Plasma Cutter
The Pro-Cut 55 is ideal for HVAC, sheetmetal, and light plate fabrication metalworking jobs. Its 60 amps of cutting power can slice through materials up to 3/4-inch thick.
Phone: 800-992-3525
www.lincolnelectric.com
-
Lincoln Electric Power MIG 255C Welder
MIG 255C is an economical, but rugged and low-splatter unit for steel, stainless, and aluminum.
Phone: 800-992-3525
www.lincolnelectric.com
