Quantcast

LAST EPISODE

Two-Car Garage Crawler Part 8: Payoff

Our pre-fab buggy is almost complete! Today on Xtreme 4x4, we'll wire up our rig, with an emphasis on easy operation and field repair. Then we'll take it to the tall rocks at Mayhem Off Road Park to see how it handles extreme obstacles!

Building a Full-Manual Automatic Trans - October, 2013

Building a Full-Manual Automatic Trans

October, 2013 / Pages 8-18

The Xtreme Two-car Garage Rock Crawler needed a transmission, and instead of going with a manual trans which would require a clutch pedal...

Slide 1

EPISODES

  • Two-Car Garage Crawler Part 8: Payoff

  • Short Course RC Cars / Dirt Riot Moab

  • 2-Car Garage Crawler Part 7 / Driveway Rescue 4

Slide 2

EPISODES

  • The Xtreme 4x4 Mail Bag

  • Driveway Rescue Part 5

  • Hot Rod Jeep Part 2

Slide 3

EPISODES

  • Two-Car Garage Crawler Part 8: Payoff

  • Short Course RC Cars / Dirt Riot Moab

  • Rod Jeep Part 1

Slide 4

EPISODES

  • 2-Car Garage Crawler Part 7 / Driveway Rescue 4

  • The Xtreme 4x4 Mail Bag

  • Project: MF JK Part 2

SEASONS

EPISODES

XT2013-23

Team-Built TJ Part 4

Ian and a crew of seasoned auto techs wrap up a major rebuild of one lucky viewer's Jeep TJ. We'll take him to the trail and sit him behind the wheel, for his first serious off-road adventure!...

XT2013-22

Team-Built TJ Part 3

We told a viewer that we'd take a look at the shaky suspension on his lifted TJ. But we called in a nationwide team of 16 auto techs from 9 shops to rebuild his ride! Today: hydraulic-assist steering, revamped electronics, and selectable lockers....

XT2013-21

Team-Built TJ Part 2

A nationwide team of auto techs drop by the Xtreme 4x4 shop to transform a viewer's beat-up TJ into a fully-loaded dual-purpose rig! The build continues with stainless exhaust, a custom rollcage, and high-tech axle assemblies....

XT2013-20

Team-Built TJ Part 1

When one of our viewers took us for a ride in his wobbly, lifted Jeep TJ, we told him we'd take a look at it. What he doesn't know is we're rebuilding it from the ground up, with trail-tested suspension, a powerful straight-six 4.0L and more!...

XT2013-19

Driveway Rescue Part 5

This year on Xtreme 4x4, we've taken the show on the road, heading to your house to help on your projects in our Driveway Rescue van. Today we'll help a viewer install a power steering upgrade on his FJ40. Plus: updates on our earlier Driveway Rescues....

XT2013-18

Hot Rod Jeep Part 2

Ridiculously tall gear shifters...just a couple of gauges...and miles of power and style! Hot rods are cool, and we're building an off-road version, using a junkyard JK. This week we'll drop the body back onto the frame and tackle the interior and the roll cage....

XT2013-17

Two-Car Garage Crawler Part 8: Payoff

Our pre-fab buggy is almost complete! Today on Xtreme 4x4, we'll wire up our rig, with an emphasis on easy operation and field repair. Then we'll take it to the tall rocks at Mayhem Off Road Park to see how it handles extreme obstacles!...

XT2013-16

Short Course RC Cars / Dirt Riot Moab

You want the excitement of short course racing, but don't have the money for a race team? There may be a short course RC car in your future! We've got the upgrades to get the most bang for your buck. Plus: Full-scale Dirt Riot action in Moab!...

XT2013-15

Rod Jeep Part 1

The paint is worn, and there's a thin layer of surface rust on the body. It was totaled in a wreck. But there's a HEMI inside our salvage yard 2007 Jeep Wrangler, and that's what we need to create an over-the-top trail rig!...

XT2013-14

2-Car Garage Crawler Part 7 / Driveway Rescue 4

If you plan to conquer steep hills, you need the right rig! Today on Xtreme 4x4, our Two-Car Garage Crawler gets twin-stick shifters, dual braking, and more! Plus: complete recovery gear for one viewer on this week's "Driveway Rescue"....

XT2013-13

The Xtreme 4x4 Mail Bag

You've got questions - we've got answers! Today we scour through our viewer emails and give you info to keep your project on track. Including: fuel cell security, selecting the right tire for your axle, wiring a fan, and more!...

XT2013-12

Project: MF JK Part 2

Now that our JK's got the parts to perform, we'll give it rugged good looks: a sleek, gunmetal finish, suspension seats, stainless steel roof rack, and a hard-hitting sound system. Then we'll see if our ride is ready for the coming zombie apocalypse!...

XT2013-11

Project: MF JK Part 1

With a plethora of aftermarket upgrades available, the Jeep JK has tons of hardcore off-road potential! We upgrade ours with capable body protection, a set of heavy duty axle assemblies, and flow-through Magnaflow exhaust!...

XT2013-10

2-Car Garage Crawler Part 6 / Driveway Rescue Project 3

Final assembly of our buggy-in-a-box begins with gears and lockers, high-steer knuckles, and all the essential off-road accessories. Plus: we drop by a viewer's house to help out on his project, on this week's Driveway Rescue....

XT2013-09

Trekking Tacoma Part 3

Our expedition-ready Tacoma receives an air compressor, heated shower, and more...but what can this rig handle on the trail? With the IFS replaced by a solid axle, and all the amenities you could want, our Tacoma is ready for the long haul!...

XT2013-08

2-Car Garage Crawler Part 5 / Streetwerkz Powder Coating

We ready our rig's drivetrain for hardcore wheeling, including an upgraded Turbo 400 transmission, and an NP205 transfer case with enhanced low-range capability for steep hills. Plus: a look at the latest in powdercoating technology!...

XT2013-07

2-Car Garage Crawler Part 4 / Driveway Rescue Project 2

It's down to the details on our "buggy in a box" build! 42" tires, air struts, and full hydraulic steering bring our crawler closer to the trail. Plus: what's the perfect wedding gift for a wheelin' husband? Find out, on this week's Driveway Rescue....

XT2013-06

Trekking Tacoma Part 2 / Easter Jeep Safari

We outfit our Toyota for adventure, with solar battery panels, a rooftop tent, serious body protection -all the items that make an expedition vehicle, an expedition vehicle! Plus: a trip to Moab, for the Easter Jeep Safari....

XT2013-05

2-Car Garage Crawler Part 3 / Southeast Tough Truck Challenge

Our budget-friendly, ready-made rock crawler project continues, with a 5.3L salvage yard engine and link suspension. Plus: start-to-finish coverage from the SETTC, one of the most demanding hill climb events around!...

XT2013-04

Trekking Tacoma Part 1

We're rebuilding our Toyota Tacoma from the ground up, making it a 100% self-contained expedition vehicle. The foundation: a comprehensive suspension upgrade, including a solid front axle, heavy duty leaf springs, and all-terrain tires....

XT2013-03

Diesel Buggy Part 6 / Driveway Rescue Project 1

After the engine in our diesel rig pulled almost 1,000 HP on the dyno, we realized we had too much truck for the trail! So we're turning it into a hardcore mud buggy! And, we'll help a viewer upgrade his driveline in our first "Driveway Rescue"!...

XT2013-02

Half-Price Raptor Part 5 / KOH Qualifier

Our F-150 update rolls on, with a supercharged 5.4L bringing the boom! We'll update the electronics to handle our V-8 and reuse some key components to save money. Plus: high-stakes racing at the East Coast King of the Hammers Qualifier!...

XT2013-01

2-Car Garage Crawler Part 2 / Hudlow Axles

Our "tube chassis in a box" needs some axles! Using only basic hand tools and a welder, we'll fabricate a wicked front axle from two bargain junkyard housings. Plus: we visit Hudlow Axle, to get some handmade shafts for our custom creation....

EPISODES

XT2012-19

Jeep TJ: On the Road, In the Rocks!

Our five-stage TJ build is complete, and we're ready to get out of the shop for a while! We'll find out how well our driveline and suspension improvements handle the rocks and test our dual-purpose rig's body protection, too....

XT2012-18

2-Car Garage Crawler Part 1 / Inside the Rock Crawler

You want to build your own tube buggy, but you don't have a garage full of fabrication gear. We've got a solution: a DIY chassis kit. With a welder and some basic tools, you can build a trail-ready tube chassis. Plus: insane hill-climb action!...

XT2012-17

Half-Price Raptor Part 4 / Jeep TJ Part 5

OK, we've upgraded our F-150 to handle and accelerate like the Raptor, but it still LOOKS like an old pickup truck. We've got a plan to take care of that! Plus: the finishing touch on our TJ project... suspension seats for long days on the rocks....

XT2012-16

Half-Price Raptor Part 3 / Jeep Speed Up Close

To perform like a Raptor, our F-150 needs a stronger engine. Today, we'll bottle up some Lightning, with a budget-friendly junkyard find. Plus: a detailed breakdown of the major components of the Jeep Speed racer....

XT2012-15

Aluminum Samurai Part 4: Zuwharrie Trail Ride

Each year, hundreds of devoted Suzuki fans gather at the Zuwharrie Trail Ride in North Carolina. This time, we crash the party with our aluminum-tubbed, turbocharged Samurai, to find out just how well our "Zuk" compares to the competition!...

XT2012-14

Essential Trail Gear and Tips / Jeep TJ Part 4

When you're stranded on the trail, the phrase most commonly heard is: "I wish I would've brought.." Today, we examine the gear that you need to carry along on all trail trips. Plus: our Jeep TJ receives a full list of interior enhancements!...

XT2012-13

Aluminum Samurai Part 3 / Jeep TJ Part 3

Do it yourself is the phrase of the day for our aluminum-bodied Samurai: hand-built doors, a custom cooling system, and a two-tone paint job will make our "Zuk" stand out in the crowd! Plus: a complete suspension and driveline upgrade for our Jeep TJ....

XT2012-12

Chase Truck Part 2

Our 2500 HD chase truck project continues, with power-adders for the engine: a cold air kit, methanol injection system, programmer, and more. Once it's fully loaded, we'll test the Chevy's abilities in the passing lane!...

XT2012-11

Spring Rates 101 / Gorilla Run Hill Climb

Whether you're hammering through the desert, or crawling on the rocks, the correct spring rate helps your rig perform its best! We'll show you how to set up your ride. Plus: hard-hitting action from the Gorilla Run hill climb!...

XT2012-10

Chase Truck Part 1 / Jeep TJ Part 2

The race car gets all the glory, but the chase truck does the heavy lifting! We focus on the rig that hauls the racer to the starting line and provides the repair & recovery needed to cross the finish line. Plus, our TJ gets an easy roll cage upgrade....

XT2012-09

Half-Price Raptor Part 2

Our F-150 build continues, with a massive front end upgrade: extended control arms, a re-geared IFS, and hardcore bypass shocks. Plus - 37" AT's for ground clearance and control. This rig's suspension will absorb anything the trail throws our way!...

XT2012-08

Half-Price Raptor Part 1 / Jeep TJ Part 1

The Ford Raptor earned its esteemed reputation with a powerful motor, top-notch suspension, and sleek styling lines. But high-tech comes at a high price. Our plan: take a 1997 F150, and design a rig to compete with the Raptor...for half the cost!...

XT2012-07

Blog Buggy Part 6

The rock crawler our viewers designed is complete! Today, we turn the final wrench on the Blog Buggy, and take it on the tallest, toughest boulders we can find. Plus: we outfit our Expedition WJ with a cost-conscious rooftop tent....

XT2012-06

Blog Buggy Part 5

Using our Blog Buggy as an example, we take you step-by-step through the process of "skinning", or making body panels for a tube buggy. We'll cover the correct materials to use, and show you the advantages of several metal cutting methods....

XT2012-05

Aluminum Samurai Part 2

With a total project weight of 2500 lbs. as our goal, the completely redesigned Suzuki receives an ultra lightweight aluminum body. Plus, we add a stock hood and mildly-modified windshield frame, to help retain that Samurai look....

XT2012-04

Expedition Jeep Grand Cherokee Part 3

The Grand Cherokee gets the last of its upgrades, and then our journey begins! We take our Jeep on a weekend wheeling trip, complete with overnight camping. From hauling gear to the campsite-to handling rocky dirt roads and trails- our WJ does it all!...

XT2012-03

Blog Buggy Part 4

The Blog Buggy returns-or at least its engine! You chose a "vintage" 5.3L small block, but Ian has some plans to improve this junkyard find. Camshaft and valve train upgrades grab us 100 more ponies, but the real power comes from a custom turbo setup!...

XT2012-02

Expedition Jeep Grand Cherokee Part 2

Expedition travelers journey well off the beaten path, searching for adventure in the far corners of the world. Our expedition WJ receives heavy-duty bumpers, winch, and hydraulic steering. Plus: we visit the Dixie Run, a festival dedicated to the Jeep....

XT2012-01

Aluminum Samurai Part I

After its second rebuild, our Suzuki Samurai was almost perfect! But why stop at "almost"? The Sammy begins a new phase, with increased suspension travel and a lower center-of-gravity thanks to a handmade double-rail frame....

EPISODES

XT2011-19

Blog Buggy Part 3

We are rounding the corner on the Blog Buggy! The viewer's choice crawler gets hydraulic steering, seats, lights, and more. Our rig is almost ready to wheel! Plus, we examine which type of fluid line works best for your specific application....

XT2011-18

Shock Tuning 101

Fresh out of the box, your shocks may perform at 80% of their potentional. But finding that last 20% can make a huge difference! Using a Blazer and a tube buggy as examples, the shock experts at Bilstein show us how to get the most out of our rides....

XT2011-17

Expedition Jeep Grand Cherokee Part I

Expedition trucks travel to some truly remote and scenic places, carrying all the provisions for food, water, and shelter. We begin our Jeep WJ Expedition project with updated suspension and axles. Plus, we take an expedition trailer on the trail....

XT2011-16

Low Dollar Wheeler Off-Road

The goal: turn a worn-out Jeep Cherokee into a capable trail rig. The budget: $5,000! With one eye on the pocketbook, and one eye on performance, we upgraded our suspension, drivetrain, tires and more. Today, we take our XJ out for a test run!...

XT2011-15

Full Size Blazer Trail Ride

After a solid axle swap, upgraded engine, and many other improvements, our dual-purpose Blazer is ready to roll! We'll test our rig's performance on the road... and in the woods. From highways to hills, we're ready for any terrain that comes our way!...

XT2011-14

Toyota Mini Truck on the Rocks

The last time we wheeled the 1991 Toyota Xtra Cab at Mayhem Off-Road Park, mechanical failure cut our day short. Today we seek our revenge, with the help of tough 1-ton axles, 44" tires, and a custom link suspension. Boulders, beware!...

XT2011-13

Blog Buggy Part 2 / Low Dollar Wheeler 5

Your wish is our command! The Blog Buggy continues, based on the results of our viewer poll. We add a custom-fabricated engine guard, winh, gas tank, radiator and more! Plus, we paint our Low Dollar Cherokee on a truly tight budget: 25!...

XT2011-12

Blog Buggy Part 1

Viewer designed, Xtreme built! Thousands of viewers took the online poll to help us build our new buggy. Starting with a pre-made chassis, we use the poll results and begin a one of a kind Crawler! Plus, our Cherokee gets an upgraded transfer case....

XT2011-11

Tig Welding 101

Although it's strong, precise, and versatile, TIG welding remains a mystery to many off-roaders. We take the guesswork out of TIG work, with detailed information for steel and aluminum welding. Plus, we look at setups for all budgets and backgrounds!...

XT2011-10

Full-Size Blazer Part IV / Low Dollar Wheeler Part 4

The belly of this beast is anything but soft! We upgrade the undercarriage of our dual-purpose Blazer with a stronger transfer case and stainless steel exhaust. And underneath the shiny, new cowl-induction hood: enhanced air intake and ignition systems!...

XT2011-09

14-Bolt Axle 101 / Low Dollar Wheeler Part 3

Everything you need to know about the tough, reliable (and affordable!) 14-bolt axle. We modify ours to increase ground clearance and reduce weight. We upgrade the internals, too. Front-steering and rear-engine applications are also covered....

XT2011-08

Green Samurai Returns!

The Green Samurai fun buggy returns for a list of drivetrain upgrades, including new gears, lockers, axle housings and more....

XT2011-07

Full Size Blazer Part 3, Low Dollar Wheeler 2

Our Low Dollar Wheeler Cherokee is back for tips on an easy no-cost locker. Plus our Blazer gets an engine rebuild, plus a roll cage and more....

XT2011-06

Full Size Blazer Part 2

From "maller" to "crawler!" Our '94 full size Chevy Blazer is transformed into a hardcore trail truck with beefy bumpers, winch, rear tire carrier and more. Plus how-to install radius arm front with coil over shocks and rear leaf spring suspension....

XT2011-05

Diesel Buggy Part 5

With an "over the top" project like our Curvy Buggy, why settle for stock diesel performance? We tear apart our 6.6L Duramax and borrow pulling truck technology for a complete bottom to top end rebuild of the diesel, then get numbers off the dyno....

XT2011-04

Supercharged JK Part 3

Our stock JK is Xtreme worthy after we add body protection, speed sensor mod, snorkel and more. Then we'll see just how close a supercharger can come to the performance numbers of a 5.7 ltr Hemi mod, when we put both on the dyno!...

XT2011-03

Full Size Blazer Part One

In 1988, when GM redesigned their pickups and SUV's to a more rounded-style, and for a more comfortable ride, a lot was lost in the wheeling department! We take a full-size Blazer, and rip out the independent front suspension for a D60 solid axle swap....

XT2011-02

Nissan Crew Truck Part Three

Sitting almost 3 years, the portal axles are out, Dana 44 and Chryslers are in! Our Pathfinder is transformed from shop eyesore, to a capable street/trail rig to carry our TV crew beyond the trailhead, and up the rocks. Massive power inverter included!...

XT2011-01

Diesel Buggy Part 4 - Suspension, Steering

Ian and Chris adapt an IFS cantilevered racing style suspension to our curvy buggy with custom fabrication on the Rockwell axles front and rear. Plus, the buggy gets full hydraulic steering front to back with joystick control, then strip it for paint....

EPISODES

XT2010-23

Fuel Saving Street Truck Start to Finish

The 1500 series Dodge goes from an 8 mpg guzzler, to a respectable 16 mpg daily driver, weekend wheeler. And along the way, upgrades are done to make this a more than capable trail truck, including Dana 60's, 37's, and a posi-lock cable for front axle....

XT2010-22

The LS Series Engines for Off Road

The GM small block was transformed in 1997 with the introduction of the LS1. Since then hundreds of thousands of these high output, high mpg electronic fuel injected motors have rested in the scrap yard. We show what to look for and how to hook 'em up....

XT2010-21

Diesel Buggy Part 3

The Curvy buggy returns for more fabrication before powder coating. Great how-to mounting tips for engine, seats, fuel cell, and battery box. Plus how to keep everything removable after it is finish welded. And details on 5 point harness seat belts....

XT2010-20

Supercharged JK Part 2

Our 2010 Wrangler JK is back for 4-link suspension, cage, bumpers, wheels and tires. Plus we'll travel to Rainbow City, Alabama for an inside look at how aftermarket parts are designed and fabricated at the state-of-the-art facility at Rusty's Off Road....

XT2010-19

Supercharged JK Part 1

Jeep never could have imagined how inventive the aftermarket would be regarding the popular 4-door Jeep Wrangler JK. And judging by our email, you want to see one get the Xtreme treatment! Ours gets a supercharger, new gearing and heavy duty axles....

XT2010-18

Diesel Buggy Part 2 - Dixie Trail Run

Our rolled tube diesel buggy is back for 20 beads for our 54's. Plus step-by-step how-to create a custom width Rockwell including reverse rotation centers for the rear engine. Plus all the action from the Southern 4 Wheel Drive Assoc. annual Dixie Run....

XT2010-17

Budget TJ Part IV - Finale

Our tricked out TJ gets axles, air lockers, cold air kit, and tuner, then gets trailered to the off road park for an inaugural trail run. And along for the ride is Tony from GenRight who brought along an '07 Jeep Wrangler JK with all new aluminum body protection....

XT2010-16

Toyota Mini Part 5 - Questions and Answers

Whether you build a full custom crawler, or a Jeep on the cheap, details can make or break your fun rig on the trail. Basic questions answered like when to finish weld, buy new or rebuild, lockers vs. spools, high pinion gearsets, steering rams, and more....

XT2010-15

Toyota Mini Part 4 - Custom Axles & Suspension

Improving the drive angles and shafts wasn't enough to make our '91 Yota "Xtreme worthy!" We ditched the solid Toyota axles for custom Ford 9 inch units with heavy duty components front and rear to make our Toy bullet proof, plus custom link suspension....

XT2010-14

Aluminum Welding

One way to craft your own custom radiators, shrouds, dash panels is by welding aluminum. Alloy welding explained including material prep, set up and technique. Plus how to add a spool gun to your machine, and save money by converting your garage welder....

XT2010-13

Military 6x6 Bobbed Deuce Part III - Finale!

The transformation of our military fire truck to a real daily driver weekend wheeler is complete. Full DIY low buck paint job, custom exhaust stacks, battery conversion, and a trip to the trail. Plus... Fuel Saving Street Truck returns for a vacuum gauge....

XT2010-12

Budget TJ Jeep Part III

Our daily driver weekend wheeler Jeep gets more goodies with great how-to tips. 231 transfer case upgrades, custom exhaust, hydraulic assist steering, custom pre-cut roll cage kit install, suspension seats, tire carrier, with a full size 40 inch spare!...

XT2010-11

'69 International Scout Part VI - E85 Tune - Plus Street and Trail Payoff!

Our Scout is buttoned up in this final episode. Fuel injection pros show us how to tune the EFI on our 345 small block, then afterwards, we take to the street in a performance test. Find out how our cornbinder performs off road also in a hardcore test....

XT2010-10

Diesel Buggy Part 1 - Step by Step Design.

We'll take raw tube, an idea, and a 6.6 liter turbo diesel Duramax and build one cool off road buggy, and take you thru the process of how to design from scratch. We'll turn a rough sketch into mechanical drawings and start bending and notching....

XT2010-09

Loctite "Nominate a Hero" UTV Giveaway

We upgrade an '07 Yamaha 660 Rhino from top to bottom with aftermarket upgrades, including long travel suspension, performance exhaust, wheels, tires, off-road lights, seats, and winch. Then we'll give it away to a "Hero" in our Loctite Job Done giveaway....

XT2010-08

Budget TJ Jeep Part II

How to build custom width axles for a multipurpose TJ, allowing for bigger brakes, wheels, and tires. Goodbye Dana 30's, hello Dana 60's! This is step by step from measuring width, to cutting the housings, and installing heavy duty knuckles and shafts....

XT2010-07

Military 6x6 Bobbed Deuce Part II

Our Military 6x6 is now a huge 4x4 and gets airbags and link suspension. We flip the rear hubs to match the front wheelbase, relocate the battery box, and finish up our 100% fabricated pick up bed. Plus, we'll put our fuel saving street truck on a diet!...

XT2010-06

Mud Truck Part V - Recap and Dirty Payoff

Our 800 horse mud monster finally sees its first mud hole. We'll recap this project from early beginnings as a '87 3/4 ton Chevy, to it's transformation into a open-header floor masher. Plus we'll look at the importance of the spotter in mud racing....

XT2010-05

Military 6x6 Bobbed Deuce Part I

33 years ago, it was a 2 ton US Military workhorse. We rescued this M530C fire truck from the scrap yard and found it could not only crush cars, but actually still pump water! Ian and Chris tear it down, and prepare to build a 4x4 deuce with a bed....

XT2010-04

MIG Welding 101 Different Machines, Set Up's and Techniques / America's Top Trails Part 2

MIG welding basics: What machine to buy? How to set one up properly, gas & wire choice? And what is the best technique for solid welds? All of this demonstrated. Plus America's Top Trails Part 2: The Rocky Mountains, and Central Arkansas....

XT2010-03

'69 International Scout Part VII - Wiring Basics, Gauges, Schematics, Troubleshooting

Wiring a truck can be a daunting task. Ian breaks it down from layout, schematic diagrams, to actual wiring of our IH Scout. Ignition, gauges, lights, plus simple circuits explained, plus how to turn a conventional alternator into a single wire setup....

XT2010-02

Budget Buggy Part IV - Custom Paint with Aerosol Cans & Re-Assembly

Our Budget Buggy returns for reassembly. How to get a custom paint job with rattle cans. Plus a winch, fuel cell and a skin. And in Part 1 of "America's Top Trails" we'll travel to New Mexico's Choke Cherry Canyon & KY's - Land Between the Lakes....

XT2010-01

'69 International Scout Part VI - Springs, Brake, Fuel System

Our IH Scout build continues with exhaust, fuel system, & new suspension. Smaller coil springs are in order to lower the truck's center of gravity. A brake kit provides stopping power. Plus, we'll show you some cool extras to be the envy on the trail....

EPISODES

XT2009-23

Remote Control Rock Crawler Build!

The hottest thing in off-roading is a mini version of itself! We'll build three different radio controlled rock buggies. From a 1:18 scale to play with around the house, to a big 1:10 full competition tube buggy with custom suspension, links, & beadlocks. Plus we'll meet a fan who built an RC "S10 Truggy."...

XT2009-22

Budget TJ Part 1

What can you do with a wrecking yard TJ and a bunch of new & used parts? Find out when our "Tricked out TJ" begins with body protection, suspension, wheels & tires. This show will have tips and tricks for the hardcore builder, and weekend wrencher....

XT2009-21

'69 International Scout Part V - Transmission & Winch Rebuild

Our popular Scout returns to the shop for two popular rebuilds. Why throw away a used transmission and pulling winch when you can rebuild them yourself! We'll gut a 700R4 automatic trans and a popular winch in order to make both good as new....

XT2009-20

CJ8 Scrambler Part V - Payoff!

Our hybrid Scrambler project began in '08, and today the hard work pays off. We'll travel to the Scrambler Owners Association National Scramble in Hot Springs, AR to learn and see why they're cool, plus find out just how capable our project Scrambler is on the trail."...

XT2009-19

Budget Buggy Part III - Steering Front/Rear Axles

Our Budget Buggy returns to our small fabrication shop for Part 3, when the single seater gets two Toyota steering axles. Detailed how-to in preparing axles to handle larger tires. Plus "King of the Stock Mods" Rock Crawl Champion Kurt Shramovich!...

XT2009-18

Towing 101

Built your trail rig, but are now tired of borrowing your buddy's trailer every weekend? Everything you need to know about towing, how to build a rig specific trailer, plus hitch selection, wiring, brake controllers, power adders, wheels tires & more!...

XT2009-17

'69 International Scout Part IV "Roll Cage Tech" Rock Racing Profile: Levi Shirley

The Scout 800A gets a roll cage today. Everything from design, which material to choose along with bending, cutting, notching techniques. We'll hit the XRRA trail and meet 16 yr old rock racer Levi Shirley's on his way to being the next Shannon Campbell....

XT2009-16

S10 Truggy Finale/Payoff

After 18 months, our $750 S10 cab has been morphed into a one-of-a-kind Toxic Truggy. Steering Rockwell axles front & rear, 502 Ram Jet and much more. Now see if all the sweat and busted knuckles were worth it in a full-throttle hardcore trail payoff!...

XT2009-15

Xtreme 4x4 King of the Hammers Special!

93 drivers, 7 hardcore trails, and 80 miles of unforgiving desert make for an unbelievable rock race. Ian takes us to Johnson Valley, CA and the 2009 King of the Hammers Race. This 5-hour epic battle is whittled down to 30 min of hardcore racing action!...

XT2009-14

Budget Buggy Part II - King of Hammers Preview

It's Part 2 of our first ever single-seat buggy build. 3 link suspension front/rear, coilover shocks, junkyard Toyota axles, and beadlocks turn our under $10K rig into a rolling chassis. Plus under the hood, an Acura 4 banger that doesn't need a t-case!...

XT2009-13

Budget Buggy Part I

How to create your own ultimate fab shop by spending money on tools instead of parts. We'll re-outfit our budget garage with dual purpose tools, then save money with our first single seat budget buggy by shopping for junkyard motor & drive train....

XT2009-12

'69 International Scout Part III - W.E.Rock Geo Tracker

America's 1st SUV the IH Scout continues its modern transformation, keeping a "cornbinder" at heart. The 345 V8 we snagged out of a Scout II gets rebuilt and mated to more reliable transmission and ultimate transfer case. Plus a Geo Tracker rock crawler!...

XT2009-11

S10 Truggy Part V

Green Envy is what we're calling our truck/buggy combo, in this episode custom dash, audio and more. Full custom, way over the top in every area, our truggy gets near buttoned up with a full fiberglass dash and stereo system from our buddies at MTX, plus seats, harnesses, plumbing and wiring will round out this episode....

XT2009-10

Mud Truck Part IV - The Science of a Mud Track!

Last day in the shop for our '87 3/4 ton Chevy with 588 big block super stock Mud Bogger! So much power was made by the Ford stroker, we had to swap the Dana 44 front in favor of a heavy duty aftermarket 9" axle. Plus also in this episode, drive shafts, wiring gauges and the odds and ends that go into launching a full size truck in the ...

XT2009-09

'69 International Scout Part II

Classic truck returns with step-by-step gear install, teardown of stock V8, plus introduce flex fuel conv. They were said to be the first true SUV, now Scouts are highly collectible and great trail trucks. Also in this episode, transmission and transfer case will be planned out, as well as plan the conversion of the the gasoline motor t...

XT2009-08

CJ 8 Scrambler Part IV Dual Fuel

The small block V8 roars with a dual fuel gas/propane set up in our custom hybrid Jeep Scrambler. This kit is perfect for any carbureted off-road set up. We'll do simple step by step how to on this inexpensive upgrade on our 100% custom trail Jeep....

XT2009-07

Suspension 101 - Rock Racing

How to choose a custom suspension, building a double triangulated 4 link, plus rock racing from Jellico, TN. Choosing the right shocks, coilovers or air, reservoir of mono tube all details will be discussed, plus Ian builds a mock up chassis and gives step-by-step instructions on how to calculate and build his favorite set up. And our c...

XT2009-06

'69 International Scout Part 1

This classic truck is turned into a modern dual-purpose rig with V-8 swap, lift, rear 4 link and more. International Harvester is said to have created America's first SUV when the Scout 80 was introduced in 1961. Now these vintage 4x4's are highly sought after as collectibles. We build our own with spring over axle, heavy duty axles, and ...

XT2009-05

CJ8 Scrambler Part III, Brad Lovell Rock Crawl Champion.

"2 car garage" theme continues with Scrambler Part III, axles, lockers, exhaust, gauges, wiring and more! Our 100% custom trail jeep is torn down for chassis paint, plus tips on custom fuel cells, and how to build your own axle hub socket. Then we'll travel to Perris, CA to meet the Lovell brothers, western champions in W.E.ROCK....

XT2009-04

Buying a Used Buggy - Repairs and Upgrades

How to inspect a used truck/buggy and fix what needs repairing including cage redesign. We dust off our Poison Spyder buggy for some basic maintenance tips, with pointers on what to look for before and what to upgrade after you purchase your used trail truck. And after a day of upgrades the guys take the Spyder out to see how their repai...

XT2009-03

Mud Truck Part III, Mud Racing from Louisiana

800 horse mud dragster gets suspension, steering, full floating axles, then gets fired up! Our bogger also gets closer to the starting line with heavy duty gearsets, brake boosters and upgraded leaf springs. Plus Ian goes one stop shopping for all the fuel cell plumbing to make building a race truck easier. Then our cameras travel to M...

XT2009-02

CJ8 Scrambler Part II

Jeep Scrambler gets its tub, drivetrain, beadlocks and more all in a 2 car garage with simple tools. We'll install a doubler kit for more gearing options, diy beadlocks, then keeping with our budget theme, we'll head to a local custom shop where the cage will be professionally welded cheaper than having to buy an expensive 220 volt machi...

XT2009-01

S10 Truggy Part IV - All Stock Rock Crawl Nationals from Hannibal, MO

S10 Truggy gets assembled with attention to every detail making this a hardcore performer and show stopper. Back from paint and powder coat this over-the-top 4x4 gets custom suspension, drivetrain installed, rock lights, light bar, floods and more. Plus action from Hannibal, Missouri and the All Stock Rock Crawl Nationals!...

EPISODES

XT2008-23

Xtreme 4x4 on the Trail

This episode recaps our memorable trail rides and the off road trucks built on Xtreme 4x4 in 2008. Unique 4x4's like our Green "veggie oil" Samurai, our Ultimate Hemi TJ, Toyota Mini come around again for hardcore payoffs. Plus back by popular demand, SubUrban Gorilla, FJ Cruiser, Bottom Drawer Buggy make a return...plus lots lots more!...

XT2008-22

Jeep Scrambler Part I

This Jeep Scrambler is a bit longer, a bit different, but still a popular truck build for the Xtreme off-road crowd! This will be the start of a very inexpensive project truck that most enthusiasts can do in their own garage. And to prove it, we're putting away our fancy cold saws and tube benders, and will create our own two car garag...

XT2008-21

Dual Purpose TJ Part VI - Payoff!

The final installment of our junkyard TJ will recap this popular Jeep build up. From when it rolled into our shop as an insurance write off and began its transformation into the ultimate street legal, trail ready off road truck. From the solid axles to the 5.7 Hemi conversion, we'll see this machine get emissions tested, hit the highway,...

XT2008-20

Fabrication Beginner to Advanced!

In this episode, host Ian Johnson takes his 18 years experience as a GM Technician, shop instructor, and custom truck builder, and shares his knowledge of fabrication. Everything from welding to cutting, tube bending to grinding will be discussed in detail. Drilling, working with metal - everything you wanted to know about fabrication w...

XT2008-19

S-10 Truggy Part III

One of our most over-the-top and most popular builds returns to the fabrication shop when our Xtreme team jumps back on our truck-buggy combo we're calling our Truggy. All the fabrication will be completed on the chassis including welding, radiator mounts and more. Plus our bulletproof Rockwell axles become "bomb-proof" with 45 spline 2...

XT2008-18

Mud Truck Part II - Best in the Desert / Terribles 250 from Primm, NV

The term "go big or don't go" applies here when our Xtreme team shows off the monster motor for our 1st ever Mud Bogger! We took a 1987 three-quarter ton GMC pickup, gutted it, and made room for one awesome race motor built buy our buddies down in the HorsePower shop. Plus... many asked how to turn a 2 wheel drive truck into a 4 wheel d...

XT2008-17

Dual Purpose TJ Part V / Female Rock Crawler - Nicole Johnson

In part five, the rest of the drive line in our dual purpose 2003 junkyard TJ is tended to, including transfer case, U joints, brakelines, cooling, shifter and more. All custom aftermarket applications that you can tailor to your Jeep build up. And after this episode, this Jeep will be ready for the highway and for the trail....

XT2008-16

Dual Purpose TJ Part IV - Mickey Thompson Tuff Truck Series

In part four of our 2003 TJ build, our scrap yard Jeep gets treated to a 5.7 liter 50 state legal Hemi engine swap! All the questions about this popular build will be answered including wiring, exhaust, emissions, and exactly how to get this dual purpose Jeep tagged and licensed for the street, including California! Plus, we'll head to ...

XT2008-15

Nissan Crew Truck Part II - Full Size Trail Ride from Colorado

In part two of this build, our Nissan Pathfinder is transformed into our TV Crew Viewfinder with new portal axles, leafs, and springs to bring it higher than stock. The goal? Create one awesome 4x4 that remains street legal! Great how to on suspension, and accoutrement installation that you can use on your 4x4. And in our event of the...

XT2008-14

CORR Pro 2 Race Truck Part VI - Finale. Off Road Expo Winners from Pomona

The time has come for our Championship Off Road Race truck to be plumbed, button-downed and readied for the track! We'll recap the key components then prepare all the oil, trans and cooler lines and fire up the 434 monster Ford. Ever wonder how to build an indestructible coolant line out of inch and a half .090 inch wall tubing? You'll...

XT2008-13

Make Your Own Bio Diesel - King of the Hammers

The thought of paying over $4.00 for diesel fuel has Ian and Jessi seeking a "green" alternative! The solution? We brew our own Biodiesel right in the Xtreme shop, showing viewers how they can save money, and do their part to help the environment at the same time. We'll take you through the entire process step by step. And in our eve...

XT2008-12

Ultimate 1 Ton Work Truck - Rebuilding Together Charity

In conjunction with WD-40 Company, Xtreme 4x4 takes an '08 GMC 1 ton dually, and transforms it into the ultimate work truck, which you can bid on! Bumpers, lift kit, power enhancers, bigger fuel cell are just the beginning of this installation which is capped off with 22 inch big rig wheels. After this truck goes on the road promoting W...

XT2008-11

Mud Truck Part 1

Our '87 3/4 ton Chevy pick up gets torn down from the motor to the body panels, axles and transmission. This truck is entirely stripped as our build team begins the transformation from a weekend hauler into a hardcore mud bog truck! How-to will include a trans rebuild, Ford 9" axle set up, body panel hanging, plus the motor will be wheel...

XT2008-10

Toyota Mini Truck Revisit - Trail Tips

Our 1991 Toyota mini truck makes a return to the shop to beef up the gearing, improve the drive angles, upgrade the shafts making this a true hardcore trail rig. And at the end of this show, we'll hit the trail for two segments with a "mild to wild". Plus it's also a chance for our builders to eat a little crow on their winching techniqu...

XT2008-09

Dual Purpose TJ Part III

In Part III of our ultimate on road/off road TJ our build team continues their transformation of this wrecking yard Jeep by installing axles, suspension and mounting the wheels and tires, plus adding a bunch of goodies like tube doors, soft top and more cool stuff from Quadratec. And in our event of the week, we go behind the scenes at W...

XT2008-08

Dual Purpose TJ Part II

The Jeep TJ is out of production, but that doesn't mean its out of the minds of 4 wheel enthusiasts! In part two of our dual purpose TJ project, the transformation of Ian and Jessi's 2003 junk yard find continues with a whole host of aftermarket Jeep upgrades including Dana 44 axles, coil over shocks, and a host of goodies from Quadratec...

XT2008-07

Dual Purpose TJ Part I - Scott Taylor CORR Profile

When Jeep discontinued their popular TJ, it didn't discourage off roaders from gobbling up this multi use vehicle from used car lots and junk yards. Today, Jessi and Ian find their own for the ultimate transformation. Body stretch kit, 4 speed transfer case, rolling on 38's, are just a few of the mods. Plus in our event of the week, CORR ...

XT2008-06

Nissan Crew Truck Part I - Monster Truck Freestyle from Indy

In their first Nissan build ever, Ian and Jessi take a burned out Pathfinder, and turn it into a daily driver trail truck for their TV crew. Seems the guys are tired of walking past the trail head, and are due for a minivan replacement! Engine diagnostics, long block rebuild are detailed. And in our event of the week, we travel to the ...

XT2008-05

S10 Truggy Part II

Ultimate this?... Ultimate that! No baloney here! When Xtreme's Ian and Jessi say they are building an off road hybrid truck/buggy combo they mean it! Part 2 of their S10 Truggy project is all underneath: transmission, transfer case, wheels brakes, exhaust - everything leading up to the four link suspension on front and rear Rockwell ...

XT2008-04

Transfer Case 101 Mayhem Off-Road Rock Racing

The heart of an off road 4x4 might be the engine but it's the transfer case that gets power to the axles! And with all the transfer cases out there, how do you know which is the right one for you? Jessi and Ian review the benefits of the most commonly used t-cases, their most popular upgrades, including some "doublers" and aftermarket ca...

XT2008-03

Green Samurai Part III - Finale

With the world going "green" the Xtreme Team is doing their part in the off road community by giving the Suzuki Samurai a veggie oil fuel conversion. That's right, waste vegetable oil will fuel this killer off road mini-monster with a VW turbo diesel powerplant. Final touches are made including details on converting a diesel burner to r...

XT2008-02

CORR Pro II Part V - W.E.ROCK Grand Nationals

The CORR Pro II Race Truck is back in the Xtreme Shop to get fitted for the body panels, plumbing, wiring, and all key ingredients to get this off road truck running. Plus... we travel to Houston for the W.E.ROCK Grand Nationals and a battle between the veteran crawlers and the up and coming new breed of professional drivers....

XT2008-01

Project S10 Truggy Part I

Ian and Jessi tear into their latest creation - a 1994 Chevy S10 turned hardcore 'truggy'. This $750 dollar junker will be the ultimate off road play toy! Custom tube frame, extended fenders, and a monster 502 horse powerplant. Plus a set of 46" shoes will help transform this machine into a crossbreed of a truck and a buggy....

EPISODES

XT2007-23

Dirt Sports Baja Charity Run Special!

In this special edition of Xtreme 4x4, Ian and Jessi take you to Baja California for the running of the 39 <sup>th</sup> annual Baja 1000. We follow three build teams who, along with Dirt Sports Magazine decided to put charity above competition. Three Stories from the Heart documents the experiences of the Full House race team from LA Cou...

XT2007-22

Cheap Jeep Returns

One of our favorite budget projects returns for beefier axles. See how a Ford 9" and a Dana 44 turn a competent crawler into a trail monster! Plus, there's more to a Truck Fest than just monster trucks and bikini contests! Watch our crew give away almost $10,000 of free stuff at the inaugural 4 Wheel Parts - 4 Wheel Drive Hardware Truc...

XT2007-21

Samurai Part II - MOAB II

Part two of our Samurai build up includes tearing into the body big time! Now you can back-half a Suzuki and tube the rear, or you can try and keep the structure intact. That's what we're going to do along with an exoskeleton. Check out our welding tips in this episode also. In our travels, we check out the famous Moab Rim Trail in Utah....

XT2007-20

Samurai Part I - W.E.ROCK III

Part one of our Suzuki Samurai tin top build, where a daily driver is transformed into a pint-sized hardcore 4x4. First Toyota axles are installed front and rear, along with a custom four link suspension. A build like this can be done on a budget, and our team keeps the costs low. Plus in our event of the week, we head to Las Vegas to ...

XT2007-19

CORR Part IV - Extreme Rhino Racing

In part four of our CORR Pro II race truck project, we'll build up of our killer 700+ horsepower 434 small block. Plus, Rhinos aren't just for deer hunting anymore. We're off to SOCAL for the latest craze - UTV Cross, where stock utility vehicles are pumped up and taken the the motocross track to race!...

XT2007-18

Twin Toyota Part II - Trail Payoff

Final installment of the '91 Toyota mini truck transformation into a off-road mini beast! SAS, new suspension, small block V8, gearing set up tips, and an awesome trail payoff are all showcased!...

XT2007-17

Twin Toyota Part I - TUCSON II TRAIL DUST DAYS

In this unique build, our team will design and build a '91 Toyota mini truck for Xtreme off road capability. Solid axle swap, bob and dove tail the rear end are just a few how-to elements to this episode. Plus, it's off to Arizona for the Tucson Trail Dust Days trail run, and Jessi returns from her long absence....

XT2007-16

Hybrid 609 Axle Build - MOAB I

It's the latest idea in off road axles: combining the benefits of the Ford 9 inch and the strong Dana 60. Ian takes us through step by step, on how to plan, measure and build this bulletproof axle combination. And in our event of the week, we're off to Moab's Jeep Safari, and some of it's hardest most legendary trails....

XT2007-15

SubUrban Gorilla Part X - Tow/Trail/Recovery Payoff - Aussie W.E.ROCK

With the ultimate tow rig and trailer built, there's only one thing to do... test it on the highway, and on the trail! Plus, Australia's best crawlers come to Las Vegas to show W.E.ROCK how it's done....

XT2007-14

CORR Pro II Trophy Truck - Part 3

The Pro 2 trophy truck gets its high-end suspension today, along with a full hydraulic steering setup. Plus we go through the absolute shop necessities you'll need to start your own fabrication shop....

XT2007-13

Rockwell Rebuild - Bottom Drawer Buggy Payoff 2

The Bottom Drawer Buggy gets new axles when dual Rockwells are shaved, reduction housings modified, and pinion brakes are installed. Then this budget tube buggy is taken out for one of our most hardcore payoffs ever!...

XT2007-12

CORR Pro II Trophy Truck - Part 2

The Pro 2 race truck build begins, as safety measures are discussed along with detailed roll cage design, gussets, and most importantly brakes. Plus.. short course endurance off road racing from Central Illinois....

XT2007-11

SubUrban Gorilla Part IX - Pro Truck Series Legend Rod Hall

The true finale of this ultimate trail/tow vehicle when our team buttons up the little things, then takes this beast and its gooseneck trailer out for its inaugural run. Plus, in off road circles, Rod Hall is a legend. See how this father and grandfather is passing his passion and legacy along to his family....

XT2007-10

JK Stage II Payoff - Mud Racing: Young Guns vs. Old Timers

Jeep's new 4 door Wrangler gets part II of our makeover, followed by an Xtreme trail test at a local off road park. Plus, Pennsylvania is known for two things... cheese steaks and mud running! See how the young guns take on their gray-haired counterparts at Muddy Run Raceway....

XT2007-09

Jeep Speed II - Pro Truck Series: Staats Family

Ian and Jessi continue in part II to take their '95 Jeep Cherokee XJ and transform it into a spec class Baja racer. These buggies run Best in the Desert, and SCORE competitions. New rear end... GPS gauges, off road lights, everything you need to head into the desert. Also, a look into the Pro Truck class and the Steve Staats family of ...

XT2007-08

CORR Pro II Trophy Truck Part 1 - Track Tech, Chula Vista, CA

Xtreme teams with the CORR series to build their own Pro II trophy truck! Tony Vanillo, America's premier builder provides the chassis, and we do the rest! This will be part one of a step by step building adventure, utilizing the world's top off-road technology in a series that cannot be missed! Plus in an Xtreme exclusive, highlights ...

XT2007-07

Cheap Jeep Returns / Ultimate Axle Show! - Top Shop Challenge

Xtreme's most popular build to date - the Cheap Jeep (1982 Jeep CJ) returns. And the last remaining weak link is upgraded in the form of beefier and stronger off-road axles. Plus, axle tech - everything you wanted to know about axles will be discussed in this show. And in our event of the week, some top off-road shop teams compete in a...

XT2007-06

JK Wrangler Dual Build - Camp Jeep

This is a first, when our team builds the same truck twice - the new popular 4-door Jeep Wrangler! In stage 1, we turn an already capable JK to an even better on & off road trail rig. Stage 2 - we go hardcore, bigger lift, axles, and more - to make this hot new Jeep a dedicated trail monster! Plus in our event of the week, we're off t...

XT2007-05

FJ Cruiser II Payoff / Saggin' Wagon IV - Tucson, AZ trails

Two decades apart, and vastly different our '85 Landcruiser and '07 FJ Cruiser are readied for the trail. See how full air lockers and an off road lift improves Toyota's new FJ in the field in this hardcore payoff. And in our event of the week - they don't call it Axle Alley for nothing. We're off to the Arizona desert and one of the W...

XT2007-04

FJ Cruiser I / Saggin' Wagon III - Casey Illinois Endurance Race

What is old is new again, when Ian and Jessi make a true trail truck out of the new Toyota FJ with 6 coil overs, beadlocks, lockers and more. Then their back-halved Saggin' Wagon Land Cruiser is finished off. Plus, 3 hours non-stop through the woods, rivers, jumps are what Casey Illinois endurance racing is all about! Even the eventual ...

XT2007-03

Kelderman 2008 F250 Superduty / W.E.ROCK World Championship - Las Vegas

The first ever airbag kit for the '08 Super Duty is installed, along with a trick custom audio/video system to give you street guys your "fix". Plus... Henderson, Nevada was on the global stage with the W.E.ROCK World Championships, and Xtreme 4x4 was there!...

XT2007-02

Bottom Drawer Buggy Finale / CORR Carl Renezeder Profile - Chula Vista, CA

The Bottom Drawer Buggy is finished up in this episode and taken out on the trail. Tech includes custom 4 link design along with rear wheel steering. And on the CORR track, no one has made more trips to the podium in the last 10 years than Carl Renezeder. This champion Pro 4 driver with his rig and team are profiled....

XT2007-01

Bottom Drawer Buggy Part II - Ian Johnson Mud Racing / Smoke Run, PA

Custom tube chassis building and 350 small block mods with propane injection are featured in part two of Ian and Jessi's trail rig that's built almost entirely from used parts lying around the Tech Center. Plus... fire and water don't mix when Ian burns up someone else's mud racer during a trip to the Mud Bash in Smoke Run, PA!...

EPISODES

XT2006-23

Best of Trails/Bloopers (CJ, AJ, Wyo-Crawler, Ranger Resurrection)

Highlights of our best and worst trail experiences, plus unseen footage behind the scenes, along with over two years worth of bloopers and outtakes from moments our hosts would just as soon forget!...

XT2006-22

SubUrban Gorilla Part VIII

It started as an '87 Suburban farm truck and has slowly turned into an ultimate off road tow rig. Today the Gorilla hits the road and the trail. Plus, we'll profile Mud Mom Sherie Richardson who is more at home in her mud bogger than she is in her mini van!...

XT2006-21

Jeep Speed Build

Ian and Jessi take a '95 Jeep Cherokee XJ and tear it down, then turn it into a spec class Baja racer. These buggies run Best in the Desert, and SCORE Competitions. This is a great way to get introduced to desert racing! Plus... back down to Naples and Florida Sports Park for the wildest looking "Water Jeeps" you'll ever see!...

XT2006-20

Poison Spyder Finale

Call it your ultimate off road play toy the Poison Spyder rock rod hits the trail after it gets buttoned up. See Ian and Jessi take it through it's paces as we payoff the Poison Spyder....

XT2006-19

Xtreme Ultimate Trailer

You've seen Ian and Jessi build some wide off road buggies... an ultimate tow rig... what's missing? A trailer! 28 foot flatbed goose neck that gets delivered to your door in a box! With living quarters hey will build this monster hauler from scratch... right before your eyes! Plus... see how pro driver Bruce Zeller has sacrificed his way...

XT2006-18

Skyjacker F250 Project

We're going to recreate a special order vehicle only available to oil companies based in the Middle East. These rigs come from Ford in limited quantities and are the toughest "stock" pick-ups in the world - running the oil fields in Iraq, Saudi Arabia, and Kuwait. And since you can't buy one, we build one. Plus, back in the early 90's,...

XT2006-17

Ranger Resurrection Part VIII

It's been a year and a half in the making and today, their ultimate 4x4 Ranger will hit the dirt, after Ian and Jessi plumb and fire the motor. Plus... we head to the Southern California race shop of legendary Off Road Champion Ivan "Ironman" Stewart, where we get a tour and learn the secrets to his 84 career victories!...

XT2006-16

Ranger Resurrection Part VI

The desert bandit makes a return to the shop for interior finishing, dash, gauges, wiring and the suspension... all will come together today. Plus, a trip down to South Florida for their legendary swamp buggy races!...

XT2006-15

Project Saggin' Wagon Part III

The Toyota FJ60 returns to have the front roll cage constructed as well as adding fuel injection to the motor, plus exhaust, lights, and all the wiring. Then co-host Jessi Combs takes us to the South Dakota Territory Challenge outside Rapid City, where 200 rigs from all over the country come to run the "xtremely" challenging Black Hills....

XT2006-14

Shannon Campbell Crawler Build

UROC Pro National Champion Shannon Campbell dominates rock crawling competitions and now Ian & Jessi get to build Shannon's next rig. Plus, we'll travel to Las Vegas for the latest and greatest in aftermarket parts and supplies for the offroader at the Off Road Impact Show....

XT2006-13

SubUrban Gorilla Part VII - Wiring

With the body and frame back from coating, Ian and Jessi wire their SubUrban Gorilla project, including hooking up accessories like all the lights, roof rack. Plus we're off to Indianapolis Raceway Park for a look at some Xtreme drag racing and guys who eat, sleep and breathe diesel! Performance diesel builder Dan Scheid is profiled!...

XT2006-12

Project Saggin' Wagon Part II - W.E.ROCK Judges

Ian and Jessi grab the reciprocating saw and plasma cutter and back half their beat up Toyota FJ60. This trail runner project will get new lockers, axles, and a four link suspension. Plus we'll travel to Columbus, Ohio for the W.E.ROCK Nationals and a look at professional rock crawling through the eyes of the judges!...

XT2006-11

SubUrban Gorilla Gets Winched!

No, our customized monster didn't get towed away. Jessi and Ian show you how to install not one, but two winches using the SubUrban Gorilla. One of them is a Warn 16.5ti - as in it can pull 16,500 Ibs. with 7/16th-inch aircraft cable, so it has to be mounted right. Then they fab up the front and rear of the SubUrban Gorilla for its fiberg...

XT2006-10

Cheap Jeep IV - Extreme Rock Racing!

To manual shift, or not to manual shift? That has been the question on the legitimacy of pulling the manual transmission out of the Cheap Jeep in favor of a rebuild junk yard automatic and transfer case....

XT2006-09

SubUrban Gorilla: 1000 lbs of torque & Louisiana Mud Race!

The Ultimate Tow Rig makes a return after Ian and Jessi travel to Southern California to help build the ultimate power plant - the first ever custom twin turbo Duramax diesel engine designed by Gale Banks. We build the motor from the inside out... with high tech components, to the awesome dual blowers that will eventually command over 70...

XT2006-08

Formula Toy Part II and Toy Payoff!

Ian and Jessi head back to West Sacramento where their Formula Toy rock crawler has been sitting in the lobby of the trade school since their last visit. This time 10 more students join them to plumb, wire, and fire this trick buggy. In the end, there's a special bonus for this team of student-builders, when they get to participate in t...

XT2006-07

Toyota FJ60: "Saggin' Wagon" - Off Road Expo Give-a-way!

An old worn out Land Cruiser gets new life as Ian and Jessi begin project Saggin' Wagon. The project starts with new suspension. And in our event of the week, Ian and Jessi travel to Pomona, California and the Off-Road Expo "a Shangri-La" for off-road enthusiasts. Ian and Jessi pick two unsuspecting guys out of the crowd who drive ver...

XT2006-06

Cheap Jeep Part III Tranny Tech and W.E.ROCK Nationals

One of our more popular builds makes a return, this time for a junkyard transmission build and beefier transfer case. Our budget CJ7 will be a better performer on the rocks after this show. Jessi has honors on the Dana 300, while Professor Johnson debunks the myth of the automatic transmission, by tearing it down and rebuilding it right ...

XT2006-05

Formula Toy Part One!

Ian and Jessi and the crew travel to West Sacramento, California to a trade school where top students in chassis fabrication get the opportunity of a life time: build a competition rock crawler on TV from scratch! See how 21 apprentices band together with the Xtreme 4x4 to build a Formula Toy competition rig they can be really proud of!...

Building a Full-Manual Automatic Trans - October, 2013

Building a Full-Manual Automatic Trans

October, 2013 / Pages 8-18

The Xtreme Two-car Garage Rock Crawler needed a transmission, and instead of going with a manual trans which would require a clutch pedal...

Half-Price Raptor Gets New Skin - April, 2013

Half-Price Raptor Gets New Skin

April, 2013 / Pages 52-64

Our half-price Raptor is based on a 1997 F-150, and so far we have built the supension, rebuilt and beefed-up the 5.4-liter V8, and built bullet proof...

Raptor Clone Suspension Upgrade - January, 2013

Raptor Clone Suspension Upgrade

January, 2013 / Pages 18-28

The Raptor clone is well under way, and this time we are hitting the front suspension. The stock F-150 design is fine for street use, bu in order to...

Raptor Clone - October, 2012

Raptor Clone

October, 2012 / Pages 48-57

Greatness often comes from humble beginnings. The Ford Raptor is a bona fide off-road monster that is just as fun to drive on the street. Add in the...

Aluminum Welding - April, 2011

Aluminum Welding

April, 2011 / Pages 10-19

When it comes to welding aluminum we often think of TIG (tungsten inert gas) welding. But MIG (Metal Inert Gas) welding is a much more common type...

Big Tire, Small Axle - January, 2011

Big Tire, Small Axle

January, 2011 / Pages 40-48

There is no question that the Toyota mini truck has made a huge impact in the world of off road in the last 30 years. When the truck first landed in...

Spyntech Install - October, 2010

Spyntech Install

October, 2010 / Pages 18-23

One could easily argue that the best and worst thing that ever happened to hard core off road was that it became -popular. A good thing because as...

Narrowing Axles - August, 2010

Narrowing Axles

August, 2010 / Pages 32-40

Some say it's time in the seat that makes off-roading an unbelievable good time. But for me, as much fun as it is trying to break our trail rigs...

Extreme Rhino UTV - June, 2010

Extreme Rhino UTV

June, 2010 / Pages 48-55

There are a lot of people out there who spend a lot of time "giving back" to their communities in many different ways. Some choose jobs that have them...

Monster Mash - April, 2010

Monster Mash

April, 2010 / Pages 28-35

Last fall, Ian Johnson took delivery of a retired 5-ton M530C military fire truck to serve as the core for our bobbed deuce build on Xtreme 4x4...

PowerBlock Builds:COMPLETE BUILDS

Collect your favorite PowerBlock builds from each show! See the step-by-step process of the projects that have inspired you, from budget builds to complete restorations. See these steps made easy with these start-to-finish DVDs.

PowerBlock Collections:BUILD YOUR LIBRARY

If you've ever wanted to learn more about fabrication or rebuild an engine, PowerBlock’s single-episode DVDs break down the steps of each build. Whether you’re in the living room or the garage, you can press play and pause at your own pace to follow along with the hosts.

PowerBlock Gear:SHOW SWAG

From work shirts to t-shirts and license plates to hats, sport the swag of your favorite PowerBlock show! Whether you’re an off-road enthusiasts or muscle car maniac, get the gear that shows off your automotive style!

XTREME4x4

Television's first series dedicated exclusively to showing how to fabricate hardcore trail rigs, sand buggies, lifted pickups and off-road vehicles. Xtreme 4x4 features high energy 4WD truck projects from start-to-finish plus extreme action off road events. Serious off road enthusiasts watch this TV show.

Have a question for Xtreme 4x4?


Click here to send us an email.


HP Shop Parts

Images for all of the Xtreme 4x4 shop parts.
../shop_sliders/images/HP/375x280/backyard_buddy.jpg
  1. Matco Tools

    The shop is stock with a full set of Matco hand tools, shop equipment, and diagnostic equipment.

    Phone: 888-696-2826
    www.matcotools.com
  2. Matco Lift

    Three and a quarter ton capacity, two post hydraulic lift.

    Phone: 800-696-2826
    www.matcotools.com
  3. Patton's Air Compressor & Dryer

    The shop has a full-sized industrial-strength, heavy-duty unit from Patton (left) that never falters no matter how much we tax it. They remove moisture -- allowing clean, cool air to flow. The result is an efficient compressed air system that reduces energy costs and eliminates clogged pipes and valves. The MuscleCar shop has this unit plumbed in to insure efficiency and longevity.

    Phone: 704-523-4122
    www.pattonsinc.com
  4. Col-Met Paint Booth

    Every painting project gets the benefit of the Col-Met full-sized downdraft paint booth. Constructed of 18-gauge steel, its highly efficient fans pull clean air down and filters it out the sides. Extra-clean and safe paint jobs result.

    Phone: 888-452-6684
    www.colmetsb.com
  5. Patton's Compressed Air Piping

    All the PowerBlock shows use Patton's Infinity compressed air pipe to route air wherever it's needed. It is 100% metal, non-corrosive, has high-flow rates and low pressure losses because it is smooth-bore tubing, and has a 10-year leak free guarantee on materials. Easy assembly and disconnect with solid nickel plated couplings.

    Phone: 704-523-4122
    www.pattonsinc.com
  6. TubeShark "Sharkpool" Bender & Notcher

    Here's a rolling roll-cage maker. Get the most from these two essential metalworking machines, while keeping your die sets, tools and accessories organized. All-in-one on a heavy duty steel rolling bench. The bender creates up to 180-degree quality bends, either round or square forms. Its capacity is 1/2 2-inch, 0.188 wall. The notcher has an industrial two-speed drill motor and is rigid in its 1/2-inch steel frame for precise, gap-free, notches.

    Phone: 541-382-1573
    www.tubeshark.com
  7. Dake 350 Cold Saw

    The 3-speed, manual Dake 350 circular cold saw has a 14” diameter blade and cuts up 4-3/4” diameter tubing and 6-1/4” x 3-1/2” rectangles. The cold saw head rotates to 90° for slotting. It has a cam-activated vise for quick clamping and release. The large spindle and gear has an adjustable clutch to prevent over feeding the blade.

    Phone: 800-937-3253
    www.dakecorp.com
  8. Dake Press

    This 2 HP, three-phase Dake hydraulic press has a double-acting cylinder, a ram with lifting eyes for the table, and rapid ram advance. With its welded heavy steel plate frame, it handles everything we throw at it.

    Phone: 800-937-3253
    www.dakecorp.com
  9. Dake Belt Sander

    The powerful metal fabricating belt grinder has a 4 h.p. motor with belt speed of 6,600 fpm for rapid metal removal. Advanced belt tracking with a fixed position front wheel eliminates belt walk-off. The hinged top cover opens for grinding large pieces on the entire length of the belt. The grinder pivots on its own steel base for easy adjustment to accommodate various work piece sizes and shapes.

    Phone: 800-937-3253
    www.dakecorp.com
  10. Light Racing Dies

    These flared hole dies are designed to eliminate edge tearing even when used on high strength 4130 chromoly sheet (normalized condition), with laser cut holes (hardened edges). Manufactured from premium hardened high carbon steel for maximum life, and useable up to a max sheet thickness of 0.090-in. for chromoly and 0.125-in for mild steel.

    Phone: 800-525-6505
    www.lightracing.com
  11. Millermatic 251 Mig Welder

    The 251 welds material from 22 gauge to 1/2 thick in a single pass. It has self-calibrating digital meters for presetting voltage and wire-feed speed. Basically, an easy to use, point-and-shoot welder for quick jobs around the MuscleCar shop.


    www.millerwelds.com
  12. Millermatic DVI Welder




    www.millerwelds.com
  13. Miller Spectrum 625 Plasma Cutter

    For mild steel cutting (1/2--7/8-inch), the Xtreme 4x4'ers rely on one of Miller Welding's portable and steady plasma cutters. It's fast, induces less warpage, and makes smooth cuts.


    www.millerwelds.com
  14. Miller Dynasty 200




    www.millerwelds.com
  15. Miller Syncrowave 180 Tig Welder

    For clean, high-quality, and precise welds on any metal, we use this Syncrowave 180 Tig Welder. It features adjustable penetration and cleaning action, to help eliminate tungsten spitting and arc rectification. You get aerospace quality fusion with this welder.


    www.millerwelds.com
  16. Official Hardware-The Industrial Depot

    Full line distributor of fasteners, including standard bolts & nuts, or hard to find, made to print items. Over 35 years of fastener experience.

    Phone: 866-729-9925
    www.theindustrialdepot.com
  17. Powder-X Powder Coating

    The shop uses powder coating materials and equipment from Powder-X, as do all the shops on the PowerBlock --they are the Official Powder Coating Equipment of the PowerBlock. Powder coating produces a high quality and extremely durable finish, and Powder-X can outfit a small shop or a full industrial operation with their complete powder coating systems.

    Phone: 886-326-4840
    www.powder-x.com
  18. Safety-Kleen Parts Washer

    The Safety-Kleen sink-on-a-drum parts washer is indispensable in the shop. It has a fusible link cover, flexible metal spigot, and lamp. When we wash parts in the sink basin, the cleaning fluid drains into the drum below and is recirculated.

    Phone: 800-669-5740
    www.safety-kleen.com
  19. Volunteer Welding Supply

    The shop is kept fully stocked with welding supplies and gasses by Volunteer Welding Supply. In fact, all our PowerBlock shops rely on Volunteer for all their welding supplies and gas requirements.

    Phone: 615-256-5658
    www.volunteerwelding.com
  20. KnKut Drill Counter Display

    KnKut Performance Drills are manufactured from high grade M-7 Molybdenum high speed steel. A 135 degree split point design gives you 50% more holes per drill.

    866-965-6588
    www.knkut.com